- Тип техники
- Бренд
Просмотр инструкции швейной машинки JANOME Jem Gold 2, страница 21
20
Вышивка
Установки машины
1 Выбор строчки:
20
q w
e
Embroidery
Machine setting
q Stitch selector:
w Presser foot: Remove
e Thread tension dial: 2-6
r Feed dogs Dropped
Note: There are 3 types of stitch length selection.
Drop the feed dogs and remove the foot holder.
Draw a design on the fabric with tailor's chalk.
Stretch the fabric between embroidery hoops, and place
the hoops under the needle.
Lower the presser foot lifter to engage the needle thread
tension. Holding the needle thread in your left hand,
rotate the handwheel towards you one complete turn.
Pull the needle thread to draw the bobbin thread to the
right side of the fabric. At medium speed, stitch along the
marked outline, guiding the fabric carefully by hand.
After embroidery is completed, raise the feed dogs for
normal sewing.
r
2 Прижимная лапка: снимите лапку
3 Натяжение нити: 2 – 6
4 Транспортер ткани: отключен
Примечание: можно выбрать 3 стежка разной
длины.
Отключите транспортер ткани и снимите
держатель лапки.
Переведите желаемый рисунок на ткань
портновским мелом.
Запяльте ткань в вышивальные пяльцы и
положите их под иглу.
Опустите рычаг прижимной лапки для
натяжения нити. Удерживая игольную нить
левой рукой, поверните на себя маховое колесо
(полный оборот).
Потяните за верхнюю нить и вытяните нижнюю
нить на лицевую сторону ткани. На средней
скорости начните строчить вдоль отмеченных
линий, осторожно направляя ткань рукой.
По завершении работы подключите транспортер
ткани для обычных работ.
20
q w
e
Embroidery
Machine setting
q Stitch selector:
w Presser foot: Remove
e Thread tension dial: 2-6
r Feed dogs Dropped
Note: There are 3 types of stitch length selection.
Drop the feed dogs and remove the foot holder.
Draw a design on the fabric with tailor's chalk.
Stretch the fabric between embroidery hoops, and place
the hoops under the needle.
Lower the presser foot lifter to engage the needle thread
tension. Holding the needle thread in your left hand,
rotate the handwheel towards you one complete turn.
Pull the needle thread to draw the bobbin thread to the
right side of the fabric. At medium speed, stitch along the
marked outline, guiding the fabric carefully by hand.
After embroidery is completed, raise the feed dogs for
normal sewing.
r
21
z
x
c
v
b
Caution
Before performing cleaning or maintenance, make sure
that the sewing machine is unplugged from the power
source.
* Turn the handwheel towards you to raise the
needle before cleaning.
* Do not dismantle the machine other than
explained on this page.
* Do not store the machine in a high-humidity area,
near a heat radiator or in direct sunlight.
* Clean the outside of the machine with a soft cloth
and neutral soap.
• Cleaning the hook race and feed dogs
z Remove the presser foot and needle. Remove
screw
w on the left side of the needle plate e with
the screwdriver
q supplied with the machine.
Remove the needle plate and take out the bobbin.
q
Screw driver
w Screw
e Needle plate
x Lift up the bobbin holder r and remove it.
r
Bobbin holder
c Brush out dust and lint.
v Clean the feed dogs y and hook race u with a small
brush t.
t
Brush
y Feed dogs
u Hook race
b Wipe the hook race gently with a soft, dry cloth i.
i
Dry cloth
* You may also use a vacuum cleaner.
SECTION VI CARE OF YOUR MACHINE
q
w
e
r
t
r
y
t
u
q
i
Ваш отзыв будет первым