- Тип техники
- Бренд
Просмотр инструкции акустики SVEN MS-300, страница 23
• To select the track, you can enter its number on the remote control using the numeric pad but-
tons g or select it using buttons g and h on the front panel. The display will show the track
number for a short moment, and then the playback time elapsed.
• To navigate within a track, press buttons g, h on the front panel or buttons b, c on the remote
control.
• In the Player mode, Equalizer feature is available. To select a preset mode, use the EQ a button
on the remote control.
Note. If there is no device containing Нles of the supported formats (USB/SD-card)
available, the Player mode is inactive.
Tuner Mode
• To switch to the Tuner mode, use button c on the front panel or button d on the remote control.
The subwoofer display d will show FM inscription.
• To auto scan and memorize the found stations, press button b on the front panel or button e
on the remote control long. To stop auto scanning, press this button again before the scanning is
over. The display d will show the frequency being scanned. When the channel is being memorized,
the display shows its number for a short moment.
• For manual scanning, use buttons g, h on the front panel or buttons c (down the frequency
range) and b (up the frequency range) on the remote control.
• If preset stations are available in the memory, you can switch form one to another by short
pressing buttons g, h on the front panel or buttons c, b on the remote control. You can also
enter the frequency or the number of the preset station with the remote control numeric pad
buttons. The display will show the station number for a short moment and then its frequency.
The radio will tune to the set frequency within 2-3 seconds.
LINE Mode
• To switch to the LINE mode, press button c on the front panel or button d on the remote
control. The subwoofer display d will show the LINE inscription and AUX symbol.
MUTE mode
• To enter the MUTE mode, press button b on the front panel or button e on the remote control.
To exit the MUTE mode, press the button b on the front panel or button e on the remote control
again. The MSS will return to the operation mode when a USB device is connected to the USB port
i or an SD card is inserted into the corresponding slot j
.
Note. Due to the constant development of the software, the actual MSS operation may differ
from that described in this manual. The most recent version of the manual is available at
www.sven.Н.
ENG
22
2.1 Multimedia Speaker System
Ваш отзыв будет первым