Бесплатные инструкции на русском языке
  • Тип техники
  • Бренд

Просмотр инструкции жк телевизора Sony KDL-40(46)(52)Z4500, страница 57

Sony
57
GB
Additional Information
There is a significant
difference in the output
volume level between
DIGITAL MEDIA PORT
input and TV or other
equipment input.
Adjust “Volume Offset” setting in the “Sound” menu (page 40).
Connection Diagnostic Results
“Connection successful.”does
not appear.
Check Connections
Use a straight cable for the LAN cable.
Check if the cable is connected firmly.
Check the connection between the TV and the broadband router.
Check Settings
• Change the IP address for the DNS server (see “Checking the Network
Connection” on page 36) while referring to the following.
Contact your Internet provider.
Specify the IP address of the router if you do not know the DNS of
your Internet provider.
Home Network
The server cannot be found, a
list cannot be retrieved, and
playback fails.
Once server settings are changed, turn the TV off and on by pressing 1
on the TV.
Execute “Server Diagnostics” (page 37).
When using a PC as the server
Check if the PC is turned on. Do not turn off the PC while accessing.
If security software is installed on the server, be sure to allow
connections from external devices. For details, see the manual supplied
with your security software.
The load on the PC may be too high or the server application may
become unstable. Try the following:
Stop the server application and restart it.
Restart the PC.
Reduce the number of applications running on the PC.
Reduce the amount of content.
Changes on the server are not
being applied or displayed
content differs from content
on the server.
Sometimes changes are not applied to displays on the TV even though
content has been added and/or deleted on the server. If this happens, go
back up one level and try opening the folder or server again.
Photo and/or music files do
not appear or icons are not
displayed.
Preliminary Check
Check that the connected device supports DLNA.
Operations are not guaranteed for all servers. Also, operations differ
depending on the features of the server and the content in question.
Turn the connected device on.
Check Connections
• Check that the LAN cable and/or mains lead of the server has not
become disconnected.
Check Settings
Check that the connected device is registered under “Server Display
Settings” (page 36).
• Check that the server is correctly configured.
Check that the selected equipment is connected to the network and can
be accessed.
• If the “IP Address” in “Network” under “Network Settings” is set to
“DHCP (DNS automatic)” or “DHCP (DNS manual)”, it may take some
time to recognise a device if there is no DHCP server. Execute “Server
Diagnostics” (page 37).
Condition Explanation/Solution
(Continued)
Ваш отзыв будет первым
Задайте вопрос
Ваше имя
E-mail
Вопрос*
Ваш вопрос будет опубликован после проверки
Ваш вопрос опубликован