Бесплатные инструкции на русском языке
  • Тип техники
  • Бренд

Просмотр инструкции блендера Vitek VT-8530, страница 5

Vitek
5
E N G L I S H
speed. Use this operation mode for com-
bined processing of liquid and solid food-
stuffs.
Notes:
Products should be put into the bowl before
the unit is switched on. The amount of prod
-
ucts to be processed should not exceed 2/3
of the capacity of the bowl in which they are
processed.
Before starting to chop/mix, we recommend
to peel fruit, remove inedible parts, such
as stones, and cut fruit into cubes approxi
-
mately 2х2 cm in size.
After you finish using the unit, take the power
plug out of the mains socket and remove the
detachable blender attachment (1), turning
it clockwise (pic. 1).
ATTENTION!
Do not remove the blender attachment (1)
during operation.
To avoid damaging the blades, do not pro-
cess too hard products such as cereals,
rice, spices, coffee beans, hard cheeses,
frozen products etc.
If the foodstuffs are hard to chop with the
blender attachment (1), add some liquid if
possible.
USING THE WHISK
Use the whisk attachment (9) only for beating
cream and egg whites, making biscuit dough or
for mixing ready desserts.
WARNING: Before installing the whisk (9) and
the gear (8), make sure that the power plug is
not inserted into the mains socket.
Insert the whisk attachment (9) into the
whisk gear (8) (pic. 2).
Insert the whisk gear (8) into the motor
unit (2) and turn it counterclockwise, make
sure that the gear (8) and the whisk (9) are
fixed properly (pic. 3).
Insert the power plug into the mains socket.
Immerse the whisk (9) into the bowl with
food.
Note: You can put the foodstuffs into the
cup (10).
To switch the unit on, press and hold down
the button (4) «I».
If you press and hold down the button (3)
«II», the unit will operate at maximum rota
-
tion speed.
After you finish using the unit, take the power
plug out of the mains socket, disconnect
the whisk gear (8) from the motor unit (2)
by turning the gear (8) counterclockwise
(pic. 3).
Remove the whisk (9) from the gear (8)
(pic. 2).
ATTENTION!
Do not use the whisk attachment (9) to
knead tight dough.
Put products into the bowl before switching
the unit on.
USING THE CHOPPER
The chopper is used to chop meat, cheese,
onion, herbs, garlic, carrots, walnuts, almonds,
prunes, vegetables and fruit.
ATTENTION!
Do not chop very hard products, such as ice
cubes, frozen products, nutmegs, coffee beans,
cereals etc.
Before you start chopping:
Cut meat, cheese, onions, vegetables or fruit
into pieces approximately 2x2 cm in size.
Remove stems of herbs, shell nuts.
Remove bones, sinews and cartilage from
meat.
Chopping
Caution: the blades of the chopping knife (7) are
very sharp!
Always hold the chopping knife (7) by the upper
plastic end.
Place the chopper bowl (6) on a flat stable
surface.
Set the chopping knife (7) on the axis inside
the chopper bowl (6).
Put the products into the chopper bowl (6).
Note: Do not switch the unit on when the chop
-
per bowl (6) is empty.
Install the geared lid (5) on the chopper bowl
(6) (pic. 4).
Install the motor unit (2) on the geared lid
(5) feeding chute, turn the motor unit (2)
clockwise until bumping, make sure that the
motor unit (2) is fixed properly.
Install the motor unit (2) strictly in the vertical
position and evenly.
To connect the unit to the mains, insert the
power cord plug into the mains socket.
IM VT-8530.indd 5 17.08.2018 15:17:24
Ваш отзыв будет первым
Задайте вопрос
Ваше имя
E-mail
Вопрос*
Ваш вопрос будет опубликован после проверки
Ваш вопрос опубликован