- Тип техники
- Бренд
Просмотр инструкции блендера Vitek VT-1468 OG/W, страница 4
4
ENGLISH
Attention!
– Do not immerse the motor unit (2), whisk reduc-
tion gear (5), geared lid (7), power cord and
power plug into water or any other liquids.
– Do not put the attachments and bowls in a dish
washing machine.
Continuous operation time
Continuous operation time with attachments (1,6)
should not exceed 1 minute. Continuous operation
time with the mini-chopper (9) should not exceed
20-30 seconds. Make at least a two-minute interval
between operation cycles.
USING THE BLENDER ATTACHMENT
WARNING: Before assembling make sure that the
power plug is not inserted into the socket.
– Match the marks on the motor unit body (2) and
the blender attachment (1), insert the blender
attachment (1) into the motor unit (2) and turn it
counterclockwise till bumping.
– Insert the plug into the socket.
– Immerse the blender attachment (1) into the bowl
with products, that you want to chop/mix; you can
use the measuring cup (10) for it.
Note: As this is a high-power unit, do not exceed
200 ml mark on measuring cup (10) while chopping/
mixing products in it to avoid spillage/splashing.
– Select the required whisk rotation speed by
pressing and holding the button (4) “I” or (3) “II”.
Note:
– Products should be put into the bowl before
switching on the unit.
– Before starting to chop/mix, we recommend to
peel fruit, remove inedible parts, such as bones,
and cut fruit into 2х2 cm cubes.
– After you finish using the unit, take the plug out
of the socket and remove the blender attachment
(1), turning it clockwise.
Attention!
– Do not remove the blender-attachment (1) during
blender operation.
– In order not to damage the blades, do not pro-
cess too hard products such as cereals, rice,
spices, coffee beans, ice, cheese, frozen food.
– If the products are difficult to process add some
amount of liquid.
Using the whisk
Use the whisk attachment (6) only to make cream,
biscuit dough or mixing ready desserts.
WARNING: Before assembling make sure that the
power plug is not inserted into the socket.
– Insert the whisk (6) into the gear (5).
– Match the marks on the motor unit body (2) and
the whisk gear (5), insert the whisk gear (5) into
the motor unit (2) and turn it counterclockwise
till bumping.
– Insert the plug into the socket.
– Put the whisk (6) into the bowl with products.
– Select the required whisk rotation speed by
pressing and holding the button (4) “I” or (3) “II”.
– After you finish using the unit, take the plug out
of the socket, disconnect the whisk (6) from the
gear (5) and disconnect the motor unit (2) turn-
ing it clockwise.
Attention!
– Do not use the whisk (6) to make tight dough.
– Products should be put into the bowl before
switching on the unit.
Using the mini-chopper
The mini-chopper is used to chop meat, onion,
herbs, garlic, vegetables and fruits.
Attention!
– Do not chop very hard products, such as nut-
megs, coffee beans and cereals.
Before you start chopping:
– Remove bones, sinews and cartilage from meat.
– Cut meat, onion, garlic, carrots etc. into approxi-
mately equal slices.
– When chopping greens, remove stems of herbs.
To achieve the best results refer to the table below.
Product type Weight Approximate processing
time
Meat
(1 cm slices)
250 g. 15 sec.
Greens 50 g. 10 sec.
Bread 80 g. 8 sec.
Soft fruits 200 g. 8 sec.
Chopping
Be careful – the knife is very sharp! Always hold the
knife by the upper plastic end.
– Remove the plastic protection from the blades
and set the knife (8) on the axis of chopper bowl
(9).
– Put the products into the chopper bowl (9).
– Place the geared lid (7) on the bowl (9) rotating it
clockwise until bumping.
– Match the marks on the motor unit (2) body and
the geared lid (7), insert the motor unit into the
geared lid (7) and turn the motor unit (2) clock-
wise until bumping.
– Select the required chopping knife rotation
speed, by pressing and holding the correspond-
ing button (4) “I” or (3) “II”.
– During operation hold the motor unit (2) with
one hand and the chopper bowl (9) with another
hand.
VT-1468.indd 4 15.08.2012 9:47:30
Ваш отзыв будет первым