- Тип техники
- Бренд
Просмотр инструкции микроволновой печи Vitek VT-2452 W, страница 9
9
E N G L I S H
• Press the «Express» button (18) to start cook-
ing at full power during 15 seconds; each
additional pressing of the button (18) adds
15 seconds. If you continue pressing the but-
ton (18), the setting step will be 30 seconds
and then 1 minute; maximum duration that
can be set is 2 minutes.
• Press the «Start» button (15) to start fast
cooking.
• After the end of cooking the microwave oven
will be switched off, you will hear sound signals
and the message «End» will be flashing on the
display (6); if no actions are performed during
2 minutes, you will hear a sound signal again.
Two-step cooking
Example: You need to cook products for 20 min-
utes at 100% power and then continue cooking
for 5 minutes at 50% power.
• Open the oven door (2) by pressing the but-
ton (8), put the products into the oven cavity
and close the door (2).
• Press the «Memory» button (11), the first
cooking step icon (27) will appear on the dis-
play (6).
• Press the «Power» button (19), the icon (27)
will be glowing and the power indicator «Р 10»
will appear on the display.
• Press the «Time» button (9), the symbol « : 0»
will be shown on the display and the icon (27)
will be glowing.
• Use the digital buttons (13) to set the first
cooking step time «20 : 00» minutes.
• Press the «Memory» button (11) again, the
second cooking step icon (26) will appear on
the display.
• Press the «Power» button (19), the power
indicator «Р 10» will appear on the display,
press the digital button (13) «5» to set the
50% power level, the second cooking step
icon (26) will be glowing.
• Press the «Time» button (9), the symbol « : 0»
will be shown on the display and the icon (27)
will be glowing.
• Use the digital buttons (13) to set the second
cooking step time «5 : 00» minutes.
• Press the «Start» button (15) to start two-step
cooking.
• During cooking the remaining time of the first
cooking step will be shown on the display (6)
and the icon (27) will be glowing. After the
first step of cooking ends, you’ll hear a sound
signal and the oven will switch to the second
cooking step; the remaining time of the sec-
ond cooking step will be shown on the dis-
play (6), and the icon (26) will be glowing.
• After the end of cooking the microwave oven
will be switched off, you will hear sound sig-
nals and the message «End» will be flashing
on the display (6); if no actions are performed
during 2 minutes, you will hear a sound sig-
nal again.
Note:
– If the cooking process includes defrosting
function, it should be done first.
Setting of delayed start time
Example: To start cooking at « 2 : 12» perform
the following setting steps:
• Open the oven door (2) by pressing the but-
ton (8), put the products into the oven cavity
and close the door (2).
• Make sure that the current time is set properly.
• Press the «Setting» button (14), the icon (23)
and the symbol « : 0» will be shown on the
display.
• Use the digital buttons (13) to set the cooking
start time «2 : 12».
• Set the power and the products cooking time
(see the chapter “Cooking products”).
• Press the «Start» button (15), the current time
indications will be shown on the display and
the icon (23) will be flashing.
• The cooking process will start when the cur-
rent time matches the preset time, indicated
with sound signals. The remaining cooking time
will be shown on the display (6) and the corre-
sponding operation mode icons will be glowing.
• After the end of cooking the microwave oven
will be switched off, you will hear sound sig-
nals and the message «End» will be flashing
on the display (6); if no actions are performed
during 2 minutes, you will hear a sound sig-
nal again.
• To check the preset delayed start time press
the «Setting» button (14), delayed start time
will be shown on the display (6) for 5 seconds.
Safety lock
Blocking: press and hold down the «Stop» but-
ton (16) for 3 seconds, you will hear a sound
signal and the icon (24) will appear on the dis-
play (6).
Lock cancel: In blocking mode press and hold
down the «Stop» button (16) for 3 seconds, you will
hear a sound signal and the icon (24) will go out.
IM VT-2452.indd 9 28.12.2016 11:38:59
Ваш отзыв будет первым