- Тип техники
- Бренд
Просмотр инструкции соковыжималки Vitek VT-3667, страница 4
4
ENGLISH
• Check the power cord and plug periodically.
• Never use the juice extractor if the grating
filter, power cord or the power plug is dam
-
aged, if the unit works improperly or after it
was dropped.
• Do not attempt to repair the unit. Do not dis-
assemble the unit by yourself, if any mal-
function is detected or after it was dropped,
unplug the unit and apply to any authorized
service center from the contact address list
given in the warranty certificate and on the
website www.vitek.ru.
• Transport the unit in the original package
only.
• Keep the unit out of reach of children and
disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, ITS COMMERCIAL USAGE AND USAGE
IN PRODUCTION AREAS AND WORK SPACES
IS PROHIBITED.
BEFORE THE FIRST USE
After unit transportation or storage at low
temperature keep it for at least 3 hours at
room temperature before switching on.
• Unpack the juice extractor.
Disassemble and clean the juice extractor
before usage:
• Remove the pusher (1) from the lid (3) feed-
ing chute (2).
• Lower the lock (7) and remove the lid (3).
• For easy removal of the grating filter (4)
remove the grating filter with the juice col
-
lector (5) holding the juice collector (5) and
pulling it upwards.
• Wash thoroughly and dry all the removable
parts (1, 3, 4, 5, 11) that will contact prod
-
ucts.
Note: Be cautious when holding the grating
filter (4) in your hands, as the disc grating sur
-
face is very sharp.
MAKING JUICE
Before the first plugging in make sure that
the operating voltage of the unit corresponds to
the voltage of your mains.
Fruit and vegetables meant for processing
must be fresh.
Before juice extracting wash fruit/vegetables,
remove inedible parts from vegetables or fruit,
such as stems, hard peel or stones, for exam
-
ple, of cherry or peach, cut them into pieces
easily fitting into the feeding chute (2).
• Place the motor unit (8) on a dry, flat and
steady surface.
• Before the unit assembling make sure that
the operation mode switch (9) is set to the
position «0», and the plug is not inserted into
the mains socket.
• Set the juice collector (5) on the motor
unit (8).
• Install the grating filter (4) into the juice col-
lector (5).
ATTENTION!
Do not use the juice extractor if you find
mechanical damages of the grating filter (4).
• Set the pulp container (10) behind the juice
extractor.
• Install the lid (3) on the juice collector (5)
and fix it with the lock (7).
• Remove the lid from the spout (6).
• Set the juice cup (11) under the juice drain-
ing spout (6).
• Insert the power plug into the mains socket.
• Switch the juice extractor on by setting the
switch (9) to the position «I» (low speed) or
to position «II» (high speed).
Notes:
Low speed «I» is intended for extracting juice
from soft vegetables/fruits, such as tomatoes,
ripe pears, strawberries, oranges, plums,
grapes, pumpkins, onions, cucumbers etc.
High speed «II» is intended for extracting
juice from hard vegetables/fruits, such as arti
-
choke, carrot, apples, capsicum, beet, pota-
toes, pineapples, vegetable marrows, celery,
spinach, dill, leek etc.
ATTENTION!
To avoid the grating filter (4) stopping and
motor rotor jamming during the processing
of viscous or quite hard food it is recom
-
mended to use the high speed operation
mode «II» of the juice extractor.
• The unit will be switched on only if all the
removable parts are installed properly, and
the lid (3) is fixed with the lock (7).
• Feed fruit/vegetable pieces into the lid (3)
feeding chute (2) only when the grating fil
-
ter (4) is rotating.
• Gradually put vegetables or fruits cut
beforehand into the lid (3) feeding chute (2)
IM VT-3667.indd 4 11.07.2018 10:40:37
Ваш отзыв будет первым