- Тип техники
- Бренд
Просмотр инструкции пылесоса Vitek VT-8117 BK, страница 7
7
E N G L I S H
– Clean the filters from dust and garbage, wash
the cyclonic (23), foam (24) and HEPA (25) fil-
ters under warm water jet.
Note:
– wash the HEPA filter (25), directing the water
jet to the outer side of the HEPA Filter (25).
– Do not wash filters in a dishwashing machine.
– Dry the filters thoroughly.
– Do not dry filters with a hairdryer.
– Wash the dust bin (12), wipe it and dry (pic. 3).
– Install the cyclonic filter (23) into the installa-
tion place (22), turn it clockwise until bumping
and then close the lid (20).
– Install the foam filter (24) on the HEPA fil-
ter (25) and then install the filters (24, 25)
back to their places.
– Install the assembled dust bin (12) back to
its place.
ATTENTION!
Before installing the dust bin (12) into the vac-
uum cleaner body make sure that filters - espe-
cially the foam filter (24) and the HEPA filter (25)
are dry and there is no moisture inside the dust
bin (12).
Cleaning the outlet HEPA filter (27)
• Switch the vacuum cleaner off and unplug it.
• Remove the outlet filter grid (26) by pressing
the locks (17) and remove the HEPA filter (27).
• Wash the HEPA filter (27) under slightly warm
water jet. Do not wash filters in a dishwash-
ing machine.
• Dry the HEPA filter (27). Do not dry the HEPA
filter (27) with a hairdryer.
• Install the HEPA filter (27) back to its place.
• Install the outlet filter grid (26) back to its
place.
Notes:
– Before installing the HEPA filter (27) make
sure that it is dry.
– Do not dry the HEPA filter (27) with a haird-
ryer.
Vacuum cleaner body
– Wipe the vacuum cleaner body with a soft,
slightly damp cloth and then wipe it dry.
– Do not immerse the body of the vacuum
cleaner, the power cord and the power plug
of the unit into water or other liquids. Provide
that no liquid gets inside the vacuum cleaner
body.
– Never use solvents or abrasives to clean the
surface of the vacuum cleaner.
STORAGE
• Before taking the vacuum cleaner away for
long term storage, clean its body, the dust bin
and the filters (23, 24, 25).
• For easy storing use the horizontal or verti-
cal brush storage (18) on the vacuum cleaner
body bottom.
• Keep the vacuum cleaner away from children
in a dry cool place.
DELIVERY SET
1. Vacuum cleaner with the dust bin and filters
installed – 1 pc.
2. Flexible hose – 1 pc.
3. Telescopic extension pipe – 1 pc.
4. Floor/carpet UltraClean brush - 1 pc.
5. Telescopic crevice nozzle – 1 pc.
6. Furniture brush – 1 pc.
7. Attachment holder – 1 pc.
8. Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Supply voltage: 220-240 V ~ 50 Hz
Maximum power consumption: 2200 W
Suction power: 450 W
The manufacturer reserves the right to change
the unit specifications without a preliminary noti-
fication
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 2004/108/ЕС and to the Low
Voltage Regulation (2006/95/ЕС)
IM VT-8117.indd 7 30.12.2016 15:29:47
Ваш отзыв будет первым
Вопросы пользователей
Поиск:
по производителю
по типу техники
по модели
Сортировать:
по дате
c ответами
Посетитель_Wz33sg
23 декабря 2021
Как открыть крышку,чтобы поменять мешок для пыли??
0 ответов
Ответить
0