Бесплатные инструкции на русском языке
  • Тип техники
  • Бренд

Просмотр инструкции пылесоса Vitek VT-8112 BK, страница 6

Vitek
6
ENGLISH
Notes:
Before installing the HEPA filter (22) make
sure that it is clean and dry.
Do not dry the HEPA filter (22) with a hairdryer.
Vacuum cleaner body
Wipe the vacuum cleaner body with a soft,
slightly damp cloth and then wipe it dry.
Do not immerse the body of the vacuum
cleaner, the power cord and the power plug of
the unit into water or other liquids. Provide that
no liquid gets inside the vacuum cleaner body.
Do not use any solvents or abrasives for
cleaning the vacuum cleaner body and the
accessories.
STORAGE
Before taking the vacuum cleaner away for
long term storage, clean its body, the dust-
bag (18) and the filters (20, 22).
For easy storing use the brush storage
place (16) and the bottom part of the vacuum
cleaner body.
Keep the unit out of reach of children and dis-
abled persons.
DELIVERY SET
1. Vacuum cleaner with the filters and the cloth
dustbag installed – 1 pc.
2. Flexible hose – 1 pc.
3. Telescopic extension pipe – 1 pc.
4. Floor/carpet brush – 1 pc.
5. Attachments – 2 pcs.
6. Paper dustbag – 3 pcs.
7. Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Supply voltage: 220-240 V ~ 50/60 Hz
Maximum power consumption: 1800 W
Suction power: 350 W
RECYCLING
For environment protection do not throw out the
unit and the batteries with usual household waste
after its service life expiration; apply to the spe-
cialized center for further recycling.
The waste generated during the disposal of the
unit is subject to mandatory collection and con-
sequent disposal in the prescribed manner.
For further information about recycling of this
product apply to a local municipal administration,
a disposal service or to the shop where you pur-
chased this product.
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC
Directive 2014/30/EU and to the Low
Voltage Directive 2014/35/EU.
IM VT-8112.indd 6 23.11.2017 10:02:02
Ваш отзыв будет первым
Задайте вопрос
Ваше имя
E-mail
Вопрос*
Ваш вопрос будет опубликован после проверки
Ваш вопрос опубликован

Смотрите также другие инструкции раздела Vitek