- Тип техники
- Бренд
Просмотр инструкции пылесоса Vitek VT-1890 G/OG, страница 7
7
E N G L I S H
– Take the separator from the flask (22), holding
the separator (21) by its ledges.
– Wash the separator (21) and the flask (22)
under warm water jet and dry them thor-
oughly.
Attention: Before assembling the dust bin make
sure that all removable parts are clean and dry.
Assembling of the dust bin (8)
– Insert the separator (21) into the flask (22).
To do this, match the ledges on the separa-
tor (21) with the corresponding grooves of the
flask (22).
– Install the microfoam insert into the inlet fil-
ter body (20).
– Install the assembled inlet filter (20) back to
its place.
– Install the lid of the dust bin (19), matching the
ledges on the lid (19) with the grooves on the
dust bin flask (22) and turn the lid (19) clock-
wise until locking, the dust bin lock button (6)
should be opposite the lower lid lock (24).
Attention!
– Stop using the unit and remove the waste if it
exceeds the MAX mark (pic. 1)
– Before using the unit make sure that the seal-
ing gasket is installed properly (pic. 9). Bad
sealing (pic. 10) can let dust through and
cause motor burning.
Cleaning the outlet filter (pic. 8).
Clean the outlet filter (4) regularly.
– Take the outlet filter (3) grid off by pressing
the lock.
– Take the outlet filter (4) off from the inner side
of the grid, wash it under warm water jet and
dry it thoroughly.
– Fix the outlet filter (4) on the inner side of the
grid (3).
– Install the grid (3) back to its place.
Notes:
– Do not wash the filters (4, 20), the microfoam
insert, the separator (21) and the dust bin
flask (22) in a dishwashing machine.
– Before installing the filters (4, 20) make sure
that they are dry.
– Do not dry the filters (4, 20), the microfoam
insert and other removable parts with a hair-
dryer.
Vacuum cleaner body
– Wipe the vacuum cleaner body with a soft,
slightly damp cloth and then wipe it dry.
– Do not immerse the body of the vacuum
cleaner, the power cord and the power plug
of the unit into water or other liquids. Provide
that no liquid gets inside the vacuum cleaner
body.
– Never use solvents or abrasives to clean the
surface of the vacuum cleaner.
STORAGE
– Before taking the vacuum cleaner away for
long term storage, clean its body, the dust bin
(8) and the filters (4, 20).
– For easy storing use the brush storage (2).
– Keep the vacuum cleaner away from children
in a dry cool place.
DELIVERY SET
1. Vacuum cleaner with filters and dust bin
installed – 1 pc.
2. Flexible hose – 1 pc.
3. Telescopic extension pipe – 1 pc.
4. Universal brush – 1 pc.
5. Combined brush – 1 pc.
6. Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50 Hz
Maximum power consumption: 1800 W
Suction power: 350 W
The manufacturer reserves the right to change
the unit specifications without a preliminary noti-
fication.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 2004/108/ЕС and to the Low
Voltage Regulation (2006/95/ЕС)
VT-1890.indd 7 01.12.2015 12:40:26
Ваш отзыв будет первым