- Тип техники
- Бренд
Просмотр инструкции пылесоса Vitek VT-1847 R/B, страница 6
6
• Do not allow any objects to block the in-
lets and outlets of the vacuum cleaner.
If any of the outlets is blocked, do not
switch on the appliance. Watch there is
no dust, hairs, fluff, and other trash col-
lected on the filters as it would block the
normal airflow.
• Watch the hairs, the ends of the cloths
hanging down, fingers or other parts of
the body are not near by any vacuum
cleaner inlets
.
• Always switch the appliance off by ON/
OFF button before unplugging it from the
wall outlet.
• Take special care while cleaning the stair-
cases.
• Do not use the appliance for collecting
the inflammable liquids (gasoline, dis-
solvent, etc.). Do not use the appliance
at the places where such a liquids are
stored.
• Do not use the appliance to pick up water
or other liquids, burning or gleaming cig-
arettes, matches, smoldering ash, thin
powders, like plaster, concrete, flour or
ash dust, sharp and cutting things. Doing
so would course serious electric motor
damages.
Remember, warranty does not extend to
such damages.
• Do not use the vacuum cleaner without
dust collecting container or if the filters
are not installed in the container.
• Hold the power cord by your hand while
winding it. Do not allow the plug to strike
on the floor.
Keep these instructions in touch, use it (if
required) for reference.
Precautions
If suction power is suddenly down while
cleaning, switch the vacuum cleaner off
immediately and check out if its telescopic
tube or flexible hose is blocked. Switch off
the vacuum cleaner, then unplug the cord
from the wall outlet, remove the blocking
substance, and continue cleaning.
- Do not operate the vacuum cleaner too
close to the heated surfaces, cigarette
butts, and in the areas where the flam-
mable or combustible liquids are kept
.
- Insert the plug into the wall outlet by the
dry hands only.
- Before cleaning remove the sharp ob-
jects from the floor in order to prevent the
filters damages.
- To disconnect the power cord from the
wall outlet hold the plug, do not pull it out
by the power cable.
Assembling vacuum cleaner
Unpack the vacuum cleaner completely
and ensure there are no any damages. Any
factory defects or transportation damages
are the subjects of VITEK warranties.
Verify the vacuum cleaner voltage meets
the mains voltage in your supply line before
switching the appliance on.
Always switch off and unplug the vacuum
cleaner to change the nozzles or for main-
tenance.
Connecting and removing flexible hose
(Pic.1)
Insert the flexible hose tip (4) into the air in-
let located on the front panel of the vacuum
cleaner housing. Insert the hose up to the
click indicating the connection is proper. To
remove the flexible hose press fixing button
(5), and detach it.
Connection of telescopic tubes and
nozzles
- Connect the telescopic extension tube
(2) to the flexible hose handle (3) (Pic.
2). Press fixing button and pull out the
lower part of the telescopic tube up to
the length you need (Pic. 3).
- Choose the nozzle you need: turbo brush
(1), floor/carpet brush (22), small brush
(23), nozzle for cleaning the furniture
ENGLISH
1847.indd 61847.indd 6 06.03.2009 12:15:5106.03.2009 12:15:51
Ваш отзыв будет первым