- Тип техники
- Бренд
Просмотр инструкции пылесоса Vitek VT-1839 R/B/BK, страница 5
• Before connecting the hose, unplug
the unit.
• Always switch off the unit, using first
the ON/OFF button and then un-
plug.
• Be especially careful while cleaning
storey landings.
• Do not use the vacuum cleaner to
pick up inflammable liquids such as
benzene (gasoline, solvents) or in
places where flammable liquids are
stored.
• Do not use the vacuum cleaner to
pick up water or other liquids, burn-
ing and smoking cigarettes, match-
es, smoldering ash, fine dust, for
example from plaster, concrete, flour
or cinders.
It can lead to serious damages of the
motor, and keep in mind that these
cases are not under warranty.
• Do not use the vacuum cleaner if
- Fabric or paper dust bag
- inlet and outlet HEPA-filter are not in-
stalled;
KEEP THIS MANUAL IN AN
AVAILABLE PLACE
PRECAUTIONS
If during vacuum-cleaning the suction
force sharply decreased, switch off
the vacuum cleaner immediately and
check the extension pipe and flexible
hose with respect to blockage. Switch
off the vacuum cleaner and unplug it,
remove the blockage and then contin-
ue the cleaning.
• Do not use the vacuum cleaner near
heated sources, near an ash tray and
in places where flammable liquids
are stored.
• Insert the plug in the socket only with
dry hands.
• Before cleaning take away all sharp
objects from the floor in order not to
damage the dust bag.
• While extracting the plug from the
socket hold it by the plug, do not pull
the power cable.
Assembly
Fully unpack the vacuum cleaner and
check whether there are damages or
not. Before switching on make sure
that the voltage of the vacuum cleaner
corresponds to the net voltage. Always
unplug the vacuum cleaner and pull
the plug out of the socket while chang-
ing attachments and while preventive
measures.
1. Attaching and removal of the
flexible hose (pic. 1)
Insert the tip of the flexible hose (4)
into the inlet filter (7). Insert the hose
till the clamp, confirming the rightness
of the connection. To take off the flex-
ible hose press the clamps (5) and de-
tach the flexible hose.
2. Attaching of the extension pipe
and attachments
- Attach the extension pipe (2) to the
flexible hose handle (3).(pic. 2).
Extent the bottom of the extension
pipe for a needed length, pressing
firstly the clamp button (pic. 3).
- Select the required brush: turbo
brush (1), slit-type attachment (20),
small brush (22) attachment for fur-
niture upholstery (21) and connect it
to the extension pipe (2).
5
ENGLISH
1839.indd 51839.indd 5 07.10.2010 15:59:2507.10.2010 15:59:25
Ваш отзыв будет первым