- Тип техники
- Бренд
Просмотр инструкции пылесоса Vitek VT-1830 SR, страница 6
6
ENGLISH
Turn on the vacuum cleaner and continue •
cleaning.
Cleaning of the НЕРА-filter (9)
Clean the НЕРА-filter (9) as it gets dirty.
Switch off and unplug the unit.•
Remove the container (10), pressing the •
clamps (pic.9).
Holding the container (10), take the НЕРА-•
filter (9) from it.
Wash the НЕРА-filter (9) under a warm water •
jet. Do not use a dish wash machine to wash
the filter.
Dry the filters. Do not use a hairdryer to dry •
the НЕРА filter (9).
Wash the container (10) and dry it.•
Installing the НЕРА-filter
Install the НЕРА-filter (9) into the container •
(10).
Match the edge on the container (10) with the •
groove on the body of the vacuum cleaner
and insert the container until a click, which
confirms that it is installed properly.
Body of the vacuum cleaner
Wipe the body of the vacuum cleaner with a •
damp cloth.
Do not allow liquid to get inside the body of •
the vacuum cleaner.
Never use solvents or abrasive cleaning •
products to clean the surface of the vacuum
cleaner.
Storage
Keep the vacuum cleaner in a dry cool place, •
out of reach of children, using the brush
“parking” place (2) on the body of the unit.
Specifications
Power supply: 220 -240 V~ 50 Hz
Power consumption: 1600 W
Suction power: 300 W
The manufacturer preserves the right to change
the specifications of the unit without a prelimi-
nary notification.
Service life of the unit is at least 5 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC-Re-
quirements as laid down by the Council
Directive 89/336/EEC and to the Low
Voltage Regulation (73/23 EEC)
VT-1830 SR.indd 6VT-1830 SR.indd 6 02.08.2011 9:41:3702.08.2011 9:41:37
Ваш отзыв будет первым