- Тип техники
- Бренд
Просмотр инструкции пылесоса Vitek VT-1828 PP, страница 7
7
E N G L I S H
– Remove the inlet filter lid (23), then take the
inlet filter body (25) by the central part and
remove it from the installation place.
– Remove the foam filter (24) from the inlet filter
body (25) (pic. 3).
– Wash the inlet filter lid (23), the foam filter (24)
and the inlet filter body (25) under a warm
water jet and dry them thoroughly (pic. 4).
– Install the foam filter (24) into the inlet filter body
(25) and install them to the installation place.
– Install the inlet filter lid (23) back to its place.
Note: If you forget to install the inlet filter body
(25), the blocking system will prevent installing
the dust bin (9). Always check if the inlet filter is
installed properly.
Cleaning the outlet filter
– Remove the outlet filter grid (2) by pressing the
lock (26) upwards.
– Take the outlet filter (27) by the ledge in the
central part and remove it from the outlet fil-
ter grid (2).
– Wash the outlet filter (27) with warm water, dry
carefully and install back to its place.
– Install the outlet filter grid (2), to do this, insert
the ledges of the upper part of the grid (2) into
the notches on the unit body and press the bot-
tom part of the grid till clicking of the lock (26).
Notes:
– Do not wash the dust bin (9) and the filters (24-
25 and 27) in a dishwashing machine.
– Before installation make sure that all remov-
able parts are dry.
– Do not dry the dust bin (9) and the filters (24-
25, 27) with a hairdryer.
Turbo brush
Clean the rotating brush as it becomes dirty. You
can easily remove threads or long hair wound up
around the brush by cutting them with scissors
preliminary; be careful not to damage the bristles
of the brush.
Vacuum cleaner body
– Clean the vacuum cleaner body with a soft,
slightly damp cloth and then wipe it dry.
– Do not immerse the body of the vacuum
cleaner, the power cord and the power plug of
the unit into water or other liquids. Provide that
no water gets inside the vacuum cleaner body.
– Never use solvents or abrasives to clean the
surface of the vacuum cleaner.
Storage
– Before taking the vacuum cleaner away for
long term storage, clean its body, dust bin (9)
and filters (24, 25, 27).
– For easy storing install the brush to the brush
storage compartment (3), you can keep the
attachments on the attachment holder (15).
– Keep the vacuum cleaner away from children in
a dry cool place.
Delivery set
1. Vacuum cleaner with filters and dust bin
installed – 1 pc.
2. Flexible hose – 1 pc.
3. Telescopic extension pipe – 1 pc.
4. Turbo brush – 1 pc.
5. Floor/carpet brush – 1 pc.
6. Small dust brush – 1pc.
7. Upholstery brush – 1 pc.
8. Crevice nozzle – 1 pc.
9. Instruction manual – 1 pc.
Technical specifications
Power supply: 220-240 V ~ 50 Hz
Maximal power consumption: 2000 W
Suction power: 400 W
The manufacturer preserves the right to change
the specifications of the unit without a preliminary
notification
Unit operating life is 5 years
Guarantee
Details regarding guarantee conditions can be ob-
tained from the dealer from whom the appliance
was purchased. The bill of sale or receipt must be
produced when making any claim under the terms
of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 2004/108/ЕС and to the Low
Voltage Regulation (2006/95/ЕС)
VT-1828.indd 7 03.06.2014 17:45:11
Ваш отзыв будет первым
Вопросы пользователей
Поиск:
по производителю
по типу техники
по модели
Сортировать:
по дате
c ответами
Ирина
30 июля 2020, Калининград
Подскажите пожалуйста работает ли от аккумулятора автомобильный пылесос VITEK VT-1828 R ?
0 ответов
Ответить
0