- Тип техники
- Бренд
Просмотр инструкции пылесоса Vitek VT-1810 B, страница 4
4
ENGLISH
• Attention! Do not allow children to play with
polyethylene bags or packaging film. Danger
of suffocation!
• Do not use the power cord for carrying the
vacuum cleaner, do not close the door if the
power cord runs through the doorway, do not
let the power cord come in contact with sharp
corners or edges of furniture.
• Never use the unit if the power plug or the
power cord is damaged, if the unit works
improperly or after it was dropped. Do not
try to repair the unit by yourself. Contact an
authorized service center for all repair issues.
• Transport the unit in the original package only.
• Keep the unit out of reach of children and dis-
abled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD
USAGE ONLY
PRECAUTIONS
• If the suction power of the vacuum cleaner
decreases rapidly while cleaning, switch the
vacuum cleaner off immediately, take the
power plug out of the socket and check the
plastic pipes for obstruction. Remove the
obstruction and only then you can continue
cleaning.
• Do not use the vacuum cleaner near hot sur-
faces, ashtrays and in places where inflam-
mable liquids are stored.
ASSEMBLING THE VACUUM CLEANER
After unit transportation or storage at low
temperature, it is necessary to keep it for at
least two hours at room temperature.
• Unpack the vacuum cleaner completely and
check it for damages. In case of any damages
do not switch the vacuum cleaner on or use it.
• Before switching the vacuum cleaner on for
the first time make sure that your home mains
voltage corresponds to the vacuum cleaner
operating voltage.
• Always switch the vacuum cleaner off and
take the power plug out of the socket while
replacing the brush attachments and before
maintenance.
Plastic extension pipes (16)
• Insert the plastic connector (17) into the air
inlet of the dust bin, matching the ledge on the
connector with the groove in the air inlet until
the clamp (3) clicks.
• You can use one or two extension pipes when
operating the unit. To connect the pipes,
insert the narrow part of one pipe into the
flare end of the other one .
• Select the required attachment: floor/carpet
brush (15) or crevice nozzle (1) and attach it
to the extension pipe (16). For the operation
with the small brush (14) fix it on the crevice
nozzle (1).
Note:
• If necessary, you can attach the floor/carpet
brush (15) straight to the connector, without
using the plastic extension pipes. The crevice
nozzle (1) is inserted directly in the air inlet
without the connector.
Floor/carpet brush (15)
Small brush (14)
The small brush (14) is intended for cleaning
furniture surface, protective pile prevents
damage of polished furniture surface.
Crevice nozzle (1)
This attachment is intended for cleaning of
radiators, grooves, corners and spaces between
cushions.
Note:
Always switch the vacuum cleaner off and take
the power plug out of the socket before replacing
the brush attachments and before cleaning the
dust bin (6).
USING THE VACUUM CLEANER
Attention! You may switch the vacuum
cleaner on only with the dust bin (6) and
the outlet filter (12) installed. Always check
whether the dust bin (6) is assembled
correctly and the outlet filter (12) is installed
properly.
• Insert the power plug into the mains socket.
• Press the on/off button (10) to switch the vac-
uum cleaner on.
• After the unit operation switch the vacuum
cleaner off by pressing the button (10) and
unplug the unit.
• Use the handle (11) for carrying the vacuum
cleaner.
VT-1810_7 land.indd 4 24.02.2014 9:49:57
Ваш отзыв будет первым