- Тип техники
- Бренд
Просмотр инструкции насосы Al-ko JET F 1400 Inox, страница 12
Malfunctions
Before you attempt to remedy any malfunction of your pump, pull the plug to prevent injury or
death due to electrocution!
What is wrong?
What is the possible reason?
How to remedy the malfunction:
Motor does not run. Impeller is blocked.
Remove blockage in inlet area. Clean
the impeller with a jet of water.
Thermal switch has switched off. Wait until the thermal switch has
automatically switched the pump on
again. Check the temperature of the
liquid. Have the pump checked.
No power. Check the fuses. Have a qualified
electrician check the power supply.
Garden pump runs
but is not pumping out
liquid.
Water level too low. Lower the hose further underwater.
Air is trapped in the pump chamber. Fill the pump chamber with water.
Pump sucks air Check all connection hoses and filter
cover for tightness.
Suction hose is blocked. DANGER!
Risk of injury due to hot water!
Clear blockage in suction hose.
Pressure line is blocked. DANGER!
Risk of injury due to hot water!
Clear blockage in pressure line.
Pressure hose is bent. Straighten out pressure hose.
Garden pump is only
pumping out liquid
very slowly or weakly.
Pressure hose is bent. Straighten out pressure hose.
Hose diameter is too small.
Pump sucks air
Attach a hose with a larger diameter.
Check all connections and the cover
for tightness
Suction hose is blocked. Clear blockage in suction hose.
Pumping height is too great.
Lower pumping height (see technical
data).
Suction height is too great.
Lower suction height (see technical
data).
If you are unable to remedy a malfunction, please call the AL-KO service centre nearest you.
GB 4 Translation of original user instructions
Ваш отзыв будет первым