- Тип техники
- Бренд
Просмотр инструкции обогревателя Polaris PCH 1064G, страница 13
13
IV. Installation
• Install the horizontal beam into the holes of hold-down bars. Note the
direction.
• Put the mounting panel on the fixed position on the wall.
• Using a pencil to mark the point on the wall for the hole.
• Drill the first hole.
• Insert the soft mounting into the hole.
• Tighten screws.
• Aim the hole of back panel and the hole of the mounting panel.
• Install the under hole first.
• Then the upper one.
• After finishing screw down with two special screw.
Ваш отзыв будет первым