- Тип техники
- Бренд
Просмотр инструкции пылесоса LG VC20261HQ, страница 10
Connecting the flexible hose
Push the end of the head (1) on the flexible hose
(2) into the attachment point on the vacuum cleaner.
To remove the flexible hose from the vacuum
cleaner, press on the button (3) situated on the
head, then pull upwards.
Assembling the tubes
(depending on model)
• Metal tube (4,5)
-
Fit together the two tubes by twisting slightly.
• Telescopic tube (6)
- Push spring latch (7).
- Pull out tube to required length.
- Release spring latch to lock.
Using the cleaning head and Accessory
Nozzles
(depending on model)
Fit the large cleaning head onto the end of the tube.
• The 2 position head (10) is equipped with
a pedal (11) which allows you to alter its
position according to the type of floor to be
cleaned. Hard floor position (tiles, parquet
floors...): Press on the pedal to lower the
brush.Carpet or rug position: Press on
the pedal to lift the brush up.
• Crevice Tool (14)
For vacuuming in those normally inaccess-
ible places i.e. reaching cobwebs, or down
the side of a sofa!
• Upholstery Nozzle (15)
For vacuuming upholstery, mattresses, etc. The
thread collectors help to pick up the threads and fluff.
• Dusting brush (16)
For vacuuming picture frames furniture
outlines, books and other uneven objects.
• Accessory Holder can be attached on the
Extention wands using clamping hook.
Accessories can be stored in the holder (30).
•
Bent tube (34)
The Bent tube is used to clean easily under
sofa, table and bed.
Connect the bent tube to the hose and connect
the telescopic tube to the bent tube (You can
also connect the telescopic tube to the hose
without bent tube)
If you draw the latch lock, the bent tube is
curved. If you stretch the bent tube, it returns to
its original position.
E
How to Use
How to plug in and use
Pull out the mains lead to the desired length
and plug into the socket.
Press button (17) to start the vacuum cleaner.
To stop it press the button (17) again.
Adjusting the power level
(depending on model)
• Suction capacity increases steplessly up
to MAX.(19)
• The flexible hose handle (20) has a
manual air flow regulator (21) which
allows you to briefly reduce the suction level.
Carrying and storage
When you have switched off and unplugged
the appliance, press on the button (18) to
automatically rewind the cord.
• Use stowage clip as shown when storing
the cleaner (22).
Changing the dust bag
The dustbag needs changing when the cleaner
is set to maximum power and the cleaner head
is off the floor but the “bag full” indicator
window (23) is completely coloured red.
Even if the dustbag does not appear to be
full at this stage, it should be changed.
It could be that a great deal of very fine dust
has clogged up the pores of the dust bag.
• Turn off the appliance and unplug it.
• Remove hose.
• Open the cover (24)
Your appliance is equipped with either a
paper dust bag or a fabric dust bag (28)
(depending on model)
• Push the lever forwards in the direction of
the arrow (26), and pull off the full paper
filter bag towards the rear. Remove the
bag and throw it away.
• Insert the new paper filter bag into the unit
with the arrow pointing downwards (27).
- 9 -
Ваш отзыв будет первым