- Тип техники
- Бренд
Просмотр инструкции утюга Saturn ST-CC7144, страница 6
5
STEAM IRONING
Set the temperature control dial to the
”..” or “…” position.
Set the variable steam control to the
desired position.
Caution: Avoid coming in contact with
ejected steam.
DRY IRONING
The iron can be used on the dry setting
with or without water in the water tank,
it is best to avoid having the water tank
full while dry ironing.
Turn the variable steam control to the
minimum position.
Select the setting on the temperature
control dial best suited for the fabric to
be ironed.
Caution: If the iron has been used for a
long time, it is hot and there is no
water. Do not refill it with water until
the iron cools down.
BURST OF STEAM
The burst of steam feature provides
additional steam for removing stubborn
wrinkles.
Turn the temperature control to or
position.
Turn the variable steam control to the
maximum position
Press the powerful steam button to
release the burst of steam.
Note: To prevent water leakage from
the soleplate, do not keep the powerful
steam button pressed for more than 5
seconds.
WHEN YOU FINISHED IRONING
Set the temperature dial to the
minimum position.
Remove the main plug from the wall
socket.
Stand the iron on heel rest.
CARE AND CLEANING
Before cleaning the iron ensure it is
unplugged from the power supply and
has completely cooled down.
Do not use abrasive cleaners.
SELF-CLEANING
Fill the half of the water reservoir.
Set the temperature control to its
maximum position.
Insert the main plug into the wall
socket.
Allow the iron to heat up until the
indicator light goes out.
Unplug the iron.
Holding the iron horizontally over the
sink, change the steam control to the
maximum position.
Boiling water and steam will be ejected
from the holes in soleplate with
impurities washed out.
Move the iron over an old (preferably)
piece of cloth. This ensures that the
soleplate will be dry during storage.
ANTI-CALC SYSTEM
A special resin filter inside the water
reservoir softens the water and prevents
scale build-up in the plate. The resin
filter is permanent and does not need
replacing.
PLEASE NOTE:
Use tap water only. Distilled
and/demineralized water makes the
“Zero-Calc”, anti-calc system
ineffective by altering its
physicochemical characteristics.
Do not use chemical additives,
scented substances or decalcifiers.
Failure to comply with the above-
mentioned regulations leads to the
loss of guarantee.
ANTI-DRIP SYSTEM
With the anti-drip system, you can
perfectly iron even the most delicate
fabrics.
Always iron these fabrics at low
temperatures. The plate may cool down
to the point where no more steam
comes out, but rather drops of boiling
water that can leave marks or stains. In
these cases, the Anti-drip system
automatically activates to prevent
vaporization, so that you can iron the
most delicate fabrics without risk of
spoiling or staining them.
AUTOMATIC SHUT OFF
The automatic shut off device trips after
the iron has been left for approx. eight
minutes in the upright position or
unused for approx. Thirty seconds in the
horizontal position. warning sounds will
arise that shut off has tripped.
STORAGE
Unplug the appliance from the power
supply, empty the water tank (do it
after each use) and allow iron to cool
down completely.
Wrap the cord around the heel rest.
To protect the soleplate, place the iron
in an upright position on its heel rest.
TECHNICAL DATA
Power: 2600 W
Rated voltage: 220-240 V
Ваш отзыв будет первым