- Тип техники
- Бренд
Просмотр инструкции утюга Saturn ST-CC7127, страница 5
4
9. When placing the iron on its stand,
ensure that the surface on which the
stand is placed is stable.
10. The iron is not to be used if it has
been dropped, if there are visible signs
of damage or if it is leaking.
11. This appliance is not intended for
use by persons (including children) with
reduces physical, sensory or mental
capabilities or lack of experience and
knowledge, unless they have been given
supervision or instruction. It is not ad-
vised to use this appliance by children
under 14.
12. Children should be supervised to
ensure that they do not play with the
appliance.
Service life - 4 years.
Before putting into operation shelf life is
unlimited.
CAUTION: To avoid circuit overload, do
not operate another high wattage appli-
ance on the same circuit.
BEFORE THE FIRST USE
Some parts of the steam iron have been
slightly greased and as a result the iron
may slightly smoke when switched on
for the first time. After a short time this
will cease.
Remove protection cover from the sole-
plate and clean it with a soft cloth.
HOW TO USE
Turn the temperature control dial round
to set the appropriate temperature indi-
cated in ironing instructions or in fabric
label.
LABEL
TYPE OF TEXTILE
Do not iron this article
Synthetics, Nylon, Acrylics,
Polyester, Rayon
Wool, Silk
Cotton, Linen
Insert the main plug into the wall sock-
et. The indicator light will turn on.
When the indicator light goes out you
may start ironing.
If you set the temperature control to
lower setting after ironing at a high
temperature. it is not recommended to
iron before the indicator light switches
on again.
WATER TANK FILLING
Unplug the iron before filling the water
tank.
Hold the iron in horizontal position.
Slowly pour water through the water
inlet.
Do not fill higher than mark on the wa-
ter tank, in order to avoid spilling out of
water.
Note: Your steam iron is designed to
use tap water, However, if the water is
very hard, it is advisable to use distilled
water.
The water tank should be emptied after
each use.
Note: If you empty the water tank after
the steam iron has cooled down, set the
steam iron upright position on its heel
rest, plug it in and set the temperature
control dial to the maximum position,
heat for 2 minutes. Unplug the steam
iron from the power supply.
SPRAYING
This function can be used any time and
it does not affect the ironing tempera-
ture.
-Fill water into the iron.
-Aim the nozzle towards the garment.
-Press the spray button.
STEAM IRONING
This function can be used only at higher
ironing temperatures
• • for moderate steam;
• • • for maximum steam.
-Fill water into the iron.
-Stand the iron upright.
-Connect he iron to a suitable mains
supply outlet.
-Turn the temperature control button to
the • • or • • • setting.
-The indicator light turns on when the
required temperature is reached. The
iron is ready for use.
-Turn the steam knob to the required
position, steam starts coming out from
the holes in the sole plate.
CAUTION: Avoid coming in contact
with ejected steam.
CAUTION: If the steam iron has been
used for a long time, it is hot and there
is no water in it. Do not refill it with
water until the iron cools down.
Ваш отзыв будет первым