Бесплатные инструкции на русском языке
  • Тип техники
  • Бренд

Просмотр инструкции автовидеорегистратора Telefunken TF-DVR06HD, страница 3

Telefunken
Instruction manual
3
7. button
8.
button
9. OK button
Rear panel
10 11 12
10. Microphone
11. Micro SD memory card slot
12. Power indicator
Top panel
RESET
13 14 15
13. RESET hole (button)
14. Stand fixing holes
15. Speaker
Operations
Mounting
• Insert the fixing pins on the top of the
stand into the bracket holding holes in the
bottom of the unit and move the unit backward
until a click to fix it tightly to the bracket.
• Press the suction cup to a surface in the
car, then push the pressure valve down. Make
sure the stand is fixed properly to the surface.
• You can adjust the angle of the stand by
loosening the upper and lower washers and
bending the assembly knots.
• To unmount the stand, lift the pressure
valve, then lift the plastic ear on the suction cap.
Rotary display
To improve the display angle for viewing it,
you can rotate the display in one plane relative to
the hinge axis 180
0
leftwards and 90
0
rightwards.
Camera position
You can adjust the vertical camera position
by rotating it manually at the angle of ±85
0
to
select the best recording view angle.
Power and charging
To charge the battery of this unit connect
its USB port to the PC with the suppled USB
cable; or connect it to a car lighter socket
with the suppled car adapter. The power icon
on the bottom right corner of the display
indicates the remaining battery power.
Recording
• Before you start recording, insert a MicroSD
memory card into the memory card slot of this
unit until a click. Insert the card with correct side.
SD capacity supported: up to 32 GB.
For correct and satisfactory operation, licensed
memory cards of famous brands should be
used with this unit. Avoid using memory cards
of unknown brands. The performance class of
the card should be 6 or above, otherwise the
video quality may be low resulting in uneven
video playback.
• Auto recording: After you connect this unit
to car power source, recording will be started
automatically. After you disconnect the power
source, the unit will stop recording and save
the recorded information.
• Manual recording: Press and hold
button to switch on the unit (press and hold it
again if you want to switch off the unit). Select
recording mode by pressing repeatedly MODE
Ваш отзыв будет первым
Задайте вопрос
Ваше имя
E-mail
Вопрос*
Ваш вопрос будет опубликован после проверки
Ваш вопрос опубликован