- Тип техники
- Бренд
Просмотр инструкции жк телевизора Telefunken TF-LED32S58T2S, страница 8
Operation
8
8
Operation
General operations
Power
•
Connect the plug of the power cord to the
mains socket.
• Do not leave your TV in standby mode for
a long period of time; if you are not going to
use the unit, disconnect it from power supply.
• In TV mode the unit will automatically go to
standby mode if no signal for 5 minutes.
Operations
• Press VOL- button repeatedly to decrease
the volume; press VOL+ button repeatedly to
increase the volume.
•
Press
MUTE
to mute sound, press this button
again or increase volume to resume sound.
•
Press RECALL button on the RC to select
from the present channel and the previously
displayed channel.
• Select the TV function mode. Press
CH-/CH+ buttons to select previous or next
channels; or press number buttons to enter a
channel number directly.
• Press INFO button to display the preset
TV channel play information.
•
Press AUDIO button in TV mode repeatedly to
switch between various Nicam sound modes
(can be unavailable for some channels). This
function is optional.
Changing the battery
1. Remove the battery compartment cover
on the back of the RC.
2. Insert the batteries into the battery
compartment making sure that the correct
polarity is observed.
3. Install the cover back.
1 2 3
• Use two AAA batteries for the RC. The RC
should be pointed at remote sensor within 8
meters and within 30 degrees at the left or the
right side.
• Take the battery out of the RC if it is not
used for a long time.
• Do not mix new and used batteries or
different types of batteries. Weak batteries can
leak and severely damage the RC.
• Do not expose the RC to shock, liquids,
and do not place it in an area with high
humidity.
On average, the loading time of the TV
can take up to 40 seconds. However, the
loading time might differ, depending
on the
number of installed applications.
Signal sources
Press button, then press LEFT/RIGHT
cursor buttons on the RC or VOL+/VOL-
buttons on the panel to select a source
from available source list: DTV => ATV
=> AV => => HDMI 1 => HDMI 2 =>
USB. Press OK button on the RC to
confirm.
Teletext operations (option)
Select a TV channel in order to pick up
the picture signal of Teletext. Teletext button
functions are as follows:
TTX: Press this button to enter into TEXT
mode. Press this button again to enter mixed
mode. Press the button again to return to the
channel you are watching.
HOLD: Press this button to stop the move
to the next page. Press this button again to
cancel operation.
LIST: Toggle the list mode.
REVEAL: Press this button to reveal the
concealed information. Press this button again
to conceal the information.
Red/Green/Yellow/Blue buttons: Press
these 4 color buttons to access directly to
corresponding color page displayed at the
lower parts of teletext screen.
Ваш отзыв будет первым
Вопросы пользователей
Поиск:
по производителю
по типу техники
по модели
Сортировать:
по дате
c ответами
Светлана
04 января 2020, Калуга
Добрый день!
Подскажите,пожалуйста, как к телевизору Telefunken TF-LED32S58T2S подключить беспроводные наушники Sony c базой* Если включаю штекер в гнездо для наушников,звук пропадает на телевизоре,а в наушниках он еле слышный. Что бы снова услышать звук в самом телевизоре,приходится выдергивать штекер. На других телевизорах такого нет. Включена база и звук идет как в наушники,так и в телевизоре.Что я не так делаю?
0 ответов
Ответить
0