- Тип техники
- Бренд
Просмотр инструкции морозильной камеры Saturn ST-CF1927, страница 4
refrigerant leakage.
The refrigerant may
ignite or cause eye
injuries.
WARNING: Keep ventilation openings, in
the appliance enclosure or in the built-in
structureб clear of obstruction.
WARNING: Do not use mechanical devices
or other means to accelerate the defrost-
ing process, other than those recommend-
ed by the manufacture.
WARNING: Do not use electrical appliances
inside the food storage compartments of
the appliance, unless they are of type rec-
ommended by the manufacturer.
The ground should be flat, sturdy and hor-
izontal for a stable installing. It is not only
for safety, but also for a stable working of
the compressor without big shocks and
noises.
Carrying and installing
Carry the appli-
ance carefully and
avoid collisions
and big shakes.
Check all the posi-
tions for the package.
Pack the appliance
according to the orig-
inal one before carry-
ing.
The incline angle
should be less
than 45° during
carrying to avoid
damages of the
cooling system.
Do not place the ap-
pliance under sun-
shine or near heating
sources. It will in-
crease the power
consumption and
decrease plastic parts
or surface coatings
life.
The ground should
The appliance should
be flat, sturdy and
horizontal for a
stable installing. It
is not only for
safety, but also
for a stable work-
ing of the com-
pressor without
big shocks and
noises.
have some distance
from circumferences
for good ventilation,
heat radiation and
power consumption
decreasing.
Install the appli-
ance in a dry
place. The appli-
ance will get rust-
ed and have a
poor insulation if
in a place with
humidity or water
for a long time.
Do not install the
appliance in the
outside place
where rain can
reach.
Usage at first time
Place the appli-
ance according to
the installing
requirements.
Open the door for
air ventilating
Clean the inner cabi-
net before using.
After installing the appliance, wait for 30
minutes at least before switching on the
appliance. (During transportation the oil
in the compressor may have flowed into
the refrigeration system.)
At the beginning, the cabinet is hot and
the compressor will work for a long time
and then stopped by the thermostat at
the set temperature. At that time, the
compressor can work and stops regular-
ly.
Recommend to put goods into the cabi-
net when the cabinet temperature
reaches the set temperature.
Thermostat
Open the door as briefly as possible.
Make sure the door closed wholly to
save power consumption.
The cabinet temperature is controlled
by the thermostat on the panel. The
thermostat can set a suitable tempera-
ture range according to different ambi-
ent temperatures and different kinds
and QTY of goods.
The green indicator is the POWER indi-
cator. When plugging in, the green indi-
cator works.
The red indicator is the WARNING indi-
cator .When the temperature in the unit
become high or there is problem with
unit, the red indicator works.
The yellow indicator is FAST-FREEZE.
The switch is the FAST-FREEZE switch.
When you push the left side of switch,
the yellow indicator ON, when you push
the right side of switch, the yellow indi-
cator OFF.
When open the FAST-FREEZE switch,
the thermostat will not work .The unit
will under non-stop freezing situation in
order to freezing quickly .When the
temperature inside the unit reach the
certain lower temperature you want
,please turn off the FAST-FREEZE
switch in order to protect the compres-
sor . When turn off the FAST-FREEZE
switch, the thermostat will work auto-
matically .The thermostat knob can be
rotated from 1 to 3.
When rotating clockwise, the cooling
time will be longer & the stopping time
will be shorter. In this way, the cabinet
temperature will be lower.
When rotating anticlockwise, the cool-
ing time will be shorter & the stopping
time will be longer. In this way, the cab-
inet temperature will be higher.
After adjusting the thermostat, it will
take some time to reach the stable
working.
General knowledge for usage
Keep some spaces
between stored
goods. It do good
for cooling air
circulating and
heat exchange
and a better cool-
ing effect will be
achieved.
Seal the food by
fresh kept bags or
closed container to
avoid smell-mixed
or dry.
For hot food, hold
it cooled and then
put into the appli-
ance. If put it in
hot status, it will
decrease the cool-
ing level of the
goods nearby.
Open the door as
briefly as possible-
Make sure the door
closed wholly to
save power con-
sumption.
Put labels marked
time onto the
goods. The goods
stored early
should be taken
out early.
Set different cool-
ing temperatures
according to dif-
ferent goods. Too
low cooling tem-
perature will waste
power consump-
tion.
When switching
off or a power cut,
must restart after
5 minutes mini-
mum. Or it will
shorten the com-
pressor life or
even damage the
compressor.
If know a power
cut in advance, set
the thermostat for
a low temperature
and keep the ap-
pliance cooling for
some time. And
open the door as
briefly as possible.
When power is cut,
try not to open the
door and do not
add goods into the
appliance.
Cleaning and maintaining the appli-
ance
Regular cleaning and maintaining can
prolong the life of the appliance and
increase the cooling efficiency. Plug out
before cleaning or maintaining.
Clean the inner
6 7
Ваш отзыв будет первым