- Тип техники
- Бренд
Просмотр инструкции морозильной камеры Saturn ST-CF1922, страница 5
cabinet and outer
shell in soft
clothes with neu-
tral agent & warm
water. Do not use
hot water, corro-
sive cleaning
agents or organic
agent.
Clean the door seal
by a bleacher
which diluted by 10
times water.
Then remove the
remains by clear
water.
After maintaining,
check the below
points to make
sure safety.
1. If the connec-
tion is good be-
tween the plug
and the socket?
2. If the plug is
hot abnormally?
3. If there is any
cranny or nick on
the cord?
Before stopping for
a long time, the
appliance should
be switched off,
plugged out,
cleaned wholly and
dried for some
days.
Defrosting
Moisture in goods and air will change
into frost on the low temperature sur-
face of the evaporator (the inner surface
of the cabinet).
The frost will decrease the cooling ef-
fect. If the frost thickness reaches 5 ~
7mm, defrosting should be carried out.
1. Switch off and plug out, and take out
all the stored goods.
2. Open the door, and remove the frost
by a special defrosting shovel when the
frost gets soft.
3. Open the drain hole on the bottom,
and open the drain cover on the outer
shell. The frost water will go out
through the drain pipe.
4. Wipe off all the frost water, then plug
in and switch on the appliance.
When the cabinet temperature reaches
the set temperature, put the goods
back.
Do not defrost by metal edge tools or
electrical heating tools. They may dam-
age the evaporator.
Faults and diagnosing
No cooling
Bad cooling effects
- Check if there is a
power cut
- Check if the con-
nection between the
plug and the socket
is good.
- Check if the fuse is
switched off
- Check if the cur-
rency protector is
workable. (If the
appliance is fixed
with a currency pro-
tector)
- Check if the ther-
mostat is on a suita-
ble position.
- Check if the appli-
ance is exposed to
sunlight or near heat
sources.
- Check if there is
dust on the com-
pressor and conden-
ser.
- Check if the stored
goods are too many.
- Check if there is no
enough spaces be-
tween the goods.
- Check if some
goods are hot.
- Check if open the
door too frequently.
- Check if the door is
closed wholly.
- Check if the frost
on inner cabinet is
too thick.
The appliance does
not stop working
Big noise
- Check if the ther-
mostat is on too high
temperature.
- Check if put into
too many goods.
- Check if the ambi-
ent temperature is
too high.
- Check if the ground
is flat and sturdy.
- Check if the appli-
ance closes to walls.
- Check if the appli-
ance contacts some-
thing which is easily
shocked
Non-fault instances
Do not defrost by metal edge tools or
electrical heating tools. They may dam-
age the evaporator.
When the ambient temperature is to
high or opening the door very rarely,
there is frost on the door frame and
door seal. Just wipe off the frost water.
The appliance has a sound like water
current or water boiling. The refrigerant
goes trough the pipe to cause this
sound.
The compressor and the condenser are
hot when working.
The compressor works for a long time if
too many goods put inside.
The compressor works for a long time if
the ambient temperature is high in
summer.
If a problem can not be handled accord-
ing to the instruction manual, please
contact the Service Dept soon. Do not
try to repair the appliance by your-
selves.
Service life – 2 years
Technical data:
Mo-
del/
Data
ST-СF
1909
ST-СF
1922
ST-СF
1927
ST-СF
1928
Power
85 W
90 W
80 W
75 W
Volt-
age:
Fre-
quen
cy:
50 Hz
50 Hz
50 Hz
50 Hz
Ra-
ted
cur-
rent
0.38 А
0.4 А
0.36 А
0.34 А
Set
Freezer 1
Instruction Manual With
Warranty book 1
Package 1
Environment friendly disposal:
You can help protect the envi-
ronment!
Please remember to respect
the local regulations: hand in
the non-working electrical
equipments to an appropriate
waste disposal centre.
The manufacturer reserves the right
to change the specification and de-
sign of goods.
RU
Морозильный ларь
Уважаемый покупатель!
Поздравляем Вас с приобретением
изделия торговой марки “Saturn”.
Уверены, что наши изделия будут
верными и надежными помощни-
ками в Вашем домашнем хозяй-
стве.
Не подвергайте устройство резким
перепадам температур. Резкая
смена температуры (например,
внесение устройства с мороза в
теплое помещение) может вы-
звать конденсацию влаги внутри
устройства и нарушить его рабо-
тоспособность при включении.
Устройство должно отстояться в
теплом помещении не менее 1,5
часов.
Ввод устройства в эксплуатацию
после транспортировки произво-
дить не ранее, чем через 1,5 часа
после внесения его в помещение.
Внимательно ознакомьтесь с данной
инструкцией по эксплуатации.
Сохраните её на будущее.
Устройство прибора
На рисунке ниже обозначены назва-
ния частей морозильного ларя. Воз-
можны некоторые отличия от Вашей
модели.
1 – Дверца
2 – Корзина для хранения продуктов
3 – Корпус
4 – Панель управления
5 – Колесики
Характеристики морозильного ла-
ря
Отличная теплоизоляция.
Большая вместимость ларя при мини-
мальных габаритах.
Замок (опция.)
Экологически чистый хладагент без
ГФУ И ХФУ.
Стильный дизайн и удобство в исполь-
зовании.
Возможность использования в услови-
ях тропиков.
Функция быстрой заморозки
Антикоррозийное покрытие
Zintec
Технология работы при слабой токе
Условные обозначения
Неправильная эксплуатация может
привести к травмам или смерти
8 9
220-240 V 220-
240 V
220-
240 V
220-
240 V
Ваш отзыв будет первым