- Тип техники
- Бренд
Просмотр инструкции чайника Saturn ST-EK8425, страница 5
4
boiling. Scalding may occur if the lid is
removed during the brewing cycles.
27. Do not use the appliance for
other than intended use.
28. If the kettle is overfilled, boiling
water may be ejected.
29. The kettle is for household use
only, not for outdoor.
30. The machine should not be
operated by means of an external timer-
switch or by means of a separate
system with remote control.
31. Do not remove the lid while the
water is boiling.
32. This appliance is not designed
for commercial use.
33. Don’t boil any tea directly in
this water kettle.
HOUSEHOLD USE ONLY
Service life – 3 years. Before putting
into operation shelf life is unlimited.
PARTS DESCRIPTION
1. Body
2. Power base
3. Water level
4. Filter
5. Handle
6. Indicate light
BEFORE USING YOUR KETTLE
If you are using the kettle for the first
time, it is recommended that you clean
your kettle before use by boiling a full
kettle of water twice and then
discarding the water.
OPERATION OF YOUR KETTLE
1. Open the lid, fill with the
desired amount of water to the water
kettle. Always fill the kettle between the
minimum and maximum marks inside
the kettle. Too little water will result in
the kettle switching off before the water
has boiled.
NOTE: Do not fill the water over the
maximum level, as water may spill out
of the spout when boiling. Ensure that
the lid is firmly in place before
connecting the power cord to the outlet.
2. Connect the plug into a power
outlet. Press the switch downwards on
the handle. The indicator will light up.
Then start to boil the water. The kettle
will switch off automatically once the
water has boiled. You can shut off the
power by pressing the switch button
upwards at any moment during boiling
water.
NOTE: Ensure that switch is clear of
obstructions and the lid is firmly closed.
The kettle will not turn off if the switch
is constrained.
3. Take the plug out of the outlet.
Lift the kettle then pour the water.
NOTE: operate carefully when pouring
the water from your kettle as boiling
water will scald.
4. The kettle will not re-boil until
the switch is pressed downwards. Allow
to cool for 30~40 seconds before
reopening to boil water.
NOTE: Ensure power supply is turned
off when kettle is not in use.
5. Should you accidentally allow
the kettle to operate without water; the
boil-dry protection will automatically
switch it off. If this occurs, allow the
kettle to cool before filling with cold
water and re-boiling.
CLEANING AND MAINTENANCE
1. Always let the kettle cool down
first and disconnect the appliance from
the power outlet before cleaning.
2. Never immerse the kettle area
or cord in water, or allow moisture to
contact with these parts.
CLEANING OF HOUSING
Wipe the appearance of body with a soft
and damp cloth or cleaner, never use a
poisonous cleaner.
Descale regularly, preferably at least
once a month and more frequently if
your water is very hard.
To descale your kettle, use:
• white vinegar
- fill the kettle with half a liter of vinegar
- leave to stand for 1 hour without
heating
• citric acid:
- boil half a liter of water
- add 25g of citric acid and leave to
stand for 15 minutes.
• a specific descaling agent for plastic or
stainless steel kettles:
- follow the manufacturer's instructions.
Empty your kettle and rinse it 5 or 6
times.
Ваш отзыв будет первым