Просмотр инструкции чайника Saturn ST-EK8416, страница 5
4
1- Base unit with cord storage
compartment
2- Body
3- Spout
4- Removable filter
5- Lid
6- Lid open handle
7- On/Off switch
8- Inner indicator light
9- Handle
10- Double water level scale
INSTRUCTION FOR USE
FILTER PLACING
-Open the lid.
-Place the filter between two grooves
near the spout at the front of the kettle.
-Ensure that the filter is pressed
properly down to the bottom of the
grooves, and then close the lid.
Note: Never leave the filter loose in the
kettle. Never remove the filter while
the kettle contains hot water.
FILLING
-Remove the kettle from the base unit.
-You can fill the kettle with water via
the spout or neck with open lid.
-Do not fill the kettle with less than
0.5L of water (below “MIN” mark) to
prevent it from operating dry.
-Do not fill the kettle with more than
1.7L of water (above “MAX” mark) to
avoid overfilling and water spilling out
during the boiling.
SWITCHING ON
-After filling with water, place the
kettle on the base unit.
-Connect the plug to the power supply
and push On/Off switch. The appliance
will turn on, and the indicator will light.
SWITCHING OFF
-When water begins to boil, the kettle
will switch off automatically, and the
indicator light will go off.
Note: This appliance has a safety
system, which automatically switches
the heating element off if the appliance
inadvertently has been switched on
empty, or if it operates dry. In this
case, let the appliance cool down 10
minutes before filling with water again.
SWITCHING ON AGAIN
If the kettle has been switched off
automatically, it can be switched on
again after cooling for 15-20 seconds.
CARE AND CLEANING
-Open the lid and pour out the water
through the orifice.
-Always remove the plug from the
socket and let the appliance cool down
completely.
-Clean the outside of the kettle and the
base unit with a soft damp cloth, then
wipe with a dry cloth. Do not use any
abrasive materials.
-Remove scale regularly using special
descaling agents available at the
market, following given instructions.
Filter cleaning
-Remove the filter out of the kettle.
-Place it under a jet of tap water and
rub gently with a soft brush (not
included).
-Return the filter to its place.
TECHNICAL DATA
Power: 1850-2200 W
Voltage: 220-240 V
Frequency: 50 Hz
Current: 8.4 A
SET
ELECTRIC KETTLE 1
INSTRUCTION MANUAL
WITH WARRANTY BOOK 1
PACKAGE 1
ENVIRONMENT FRIENDLY DISPOSAL
You can help protect the
environment! Please
remember to respect the
local regulations: hand in
the non-working
electrical equipment to an
appropriate waste
disposal center.
The manufacturer reserves the
right to change the specification
and design of goods.
Ваш отзыв будет первым