- Тип техники
- Бренд
Просмотр инструкции чайника Saturn ST-EK8404, страница 3
4
Operation
1. It is recommended that operate the kettle several times following the below
instruction and discard off the water before first use. This will remove the
material or dust remained in the appliance which is caused by the
manufacturing process.
2. Open the lid by pulling the Lid upwards and fill water into the kettle. Then
replace the lid otherwise the kettle could not be cut off power automatically
after water being boiled. Alternatively the water can be filled through the
spout.
3. Caution: the filled water level must be between the Max and Min level as
indicated on the housing. Too less water will do damage to the heat element
and if the water is overfilled, boiling water may be ejected.
4. Replace the kettle on the Power Base and connect to power supply. Position
the kettle so that the spout of kettle is facing away from you.
5. Press down the switch to “1” position and the lamp will be illuminated. And
water begins to be heated up. Do not remove the lid while the water is boiling.
6. Power will be cut off automatically and switch will be back to “0” position
once water has been boiled. And the lamp will be off.
7. The boiling process can be terminated at any time by lifting the kettle off the
Power Base.
Caution:
· Never operate the appliance empty. In the event of this case occurred, the thermal
cut-off inside the kettle would operate to cut off power automatically. Unplug the
appliance and let it completely cool down.
· Never touch the stainless housing during operation as scalding may occur.
Cleaning & Maintenance
1. Remove the plug from wall outlet and let the appliance completely cool down
before cleaning.
2. Do not immerse power cord, kettle and Power Base in water.
3. In order to maintain the polish of the stainless steel surface, never use
abrasive cleaner to wipe the housing.
4. Periodical descaling is needed. The interval of descaling depends on the
hardness of water in your living area and the frequency your using the kettle.
5. The Filter can be detached for easier cleaning simply by pulling it out. To
attach, insert the Filter into the support dent.
6. Do not attempt to dismantle the kettle or power base. No user serviceable
parts inside it. For any problem, contact the authorized service facility for
help.
5
Technical Data:
Working voltage: 220-230 V
Working frequency: 50 Hz
Input Power: 2200 W
Rated Current: 10 A
Capacity 1,7 l.
Set
Electric jug kettle 1
Instruction manual 1
Warranty book 1
Package 1
ENVIRONMENT FRIENDLY DISPOSAL
You can help protect the environment!
Please remember to respect the local regulations: hand in the
non-working electrical equipments to an appropriate waste disposal
center.
The manufacturer reserves the right to change the specification and design of goods.
Ваш отзыв будет первым