Бесплатные инструкции на русском языке
  • Тип техники
  • Бренд

Просмотр инструкции чайника Saturn ST-EK0012, страница 3

Saturn
4
- Never yank on the cord as this may
damage the cord and eventually cause a
risk of electric shock.
- If the supply cord of this appliance
is damaged, it must only be replaced by
a repair shop appointed the
manufacturer, because special purpose
tools are required.
- Avoid touching hot kettle surfaces-
use the handle and knobs.
- To avoid possible steam damage,
turn the spout away from walls or
cabinets when operating the kettle.
- If operated on wood furniture, use a
protective pad to prevent damage
delicate finishes.
- To avoid scalding, always ensure the
lid is correctly positioned before
operating.
- Scalding may occur if the lid is
removed whilst heating.
- Remove and replace the lid carefully
when hot.
- Extreme caution must be used when
moving the kettle containing hot water.
- Never lift the kettle by its lid.
Always use the body handle.
- Do not switch your kettle on if it
empty.
- To protect from electrical hazard, do
not immerse this kettle, power base or
cord in any liquid.
- Use the kettle only with the supplied
base unit. Do not use the base unit for
other purposes.
- To protect against fire, do not
operate in the presence of explosive
and/or flammable fumes.
- A kettle should not be left connected
to a wall socket when the room
temperature is likely to fall to outdoor
winter temperatures control thermostat
may reset to boil energize the element.
- Do not use the kettle for any
purpose for any other uses than those
specified in this booklet.
- Position the lid so that steam is
directed away from the handle.
- Do not remove the lid while the
water is boiling.
INSTRUCTIONS FOR USE
Before first use, fill the kettle with
clean water to maximum capacity and
boil. Discard the water and repeat.
- The kettle should always be
unplugged when filling or adding water.
- Fill the kettle with water to the
desired level. Do not overfill or there will
be a risk of spillage or spitting. The
water level indicator will assist you to
measure correct amount. You can fill the
kettle via the spout or after opening the
lid. Do not forget to close the lid after
5
filling otherwise the kettle will not
automatically switch off after use.
- Do not fill with less that 0.5 liter of
water.
- Do not fill with more than 1.8 liter of
water (up to “MAX” indication).
- An automatic safety cut-out has
been fitted for protection against
overheating. It will operate if the kettle
is switched on when containing
insufficient water.
- If the automatic safety cut-out has
operated, switch the kettle off,
disconnect form the power outlet and
allow the kettle to cool down for 5-
10minutes.Then refill with water and
switch on-the kettle will then boil and
cut off as in normal operation.
- The kettle may be switched off at
any time by either pushing the switch of
the kettle to the “up” position or by
switching the power off at the power
outlet.
- To pour water, lift the kettle from the
power base and pour
CORDLESS KETTLE
- Place the power base on a dry, flat
surface.
- Place the kettle on the power base.
The electrical connections will be made
automatically as the kettle slides onto
the power base.
- Plug the cord into an earthed power
socket and switch on by depressing the
switch of the kettle to the “down”
position.
- When the water has boiled, the
kettle will switch off automatically. After
allowing the kettle to cool down for 30
seconds, the water can be brought back
to the boil by pushing the switch back to
the “down” position. During the cooling
down time do not force the on/off switch
into the “down” (“ON”) position as this
can damage the operating mechanism.
- Do not remove the kettle from the
power-base without first switching off.
- The kettle may be switched off at
any time by either pushing the switch of
the kettle to the “up” position or by
switching the power off at the power
outlet.
- To pour water, lift the kettle from
the power base and pour.
HOW TO CARE FOR YOUR KETTLE
- Wipe the exterior of the kettle with
a soft, damp cloth or sponge. Remove
stubborn spots with a cloth moistened
with mild liquid detergent. Do not use
abrasive scouring pads or powders.
Never immerse the kettle in water or
Ваш отзыв будет первым
Задайте вопрос
Ваше имя
E-mail
Вопрос*
Ваш вопрос будет опубликован после проверки
Ваш вопрос опубликован