- Тип техники
- Бренд
Просмотр инструкции соковыжималки Saturn ST-FP8088, страница 5
4
avoid danger, when cleaning a cutter,
please put the cutter under water tap
for washing, do not wash it with hand.
12. This machine must not be used for
others beyond regulated purposes.
13. In case of damaged power supply
cord, in order to avoid danger,
replacement must be performed by
the manufacturer or its service
department or similar professional
persons.
14. Service life – 4 years. Before
putting into operation shelf life is
unlimited.
Performances
1. For the juicer with large diameter,
entire apple or pear can be put in for
juicing, no cutting apart needed, easy
and quick.
2. Design is fine, simple, and
beautiful, with combined structure,
easy to operate and clean.
3. High speed electric motor with
overheating protection is adopted,
high efficiency, time saving, energy
saving, high service life of the motor.
4. Safety lock unit for switching is
specially designed, in order to make
sure safety and reliability in use.
Attention before using
1. This machine is set with safety unit,
when the handle does not fasten the
cover or the cutter seat is not
fastened, the motor cannot turn, so as
to ensure safety for the user.
2. When disassembling or assembling
the juicer, press the upper of feed port
of the cover with your hand, then
force the handle to slide in or out of
cover slot.
3. When disassembling juicing net,
first remove the cover and residue
barrel, then put up the middle ring by
holding juicing nozzle with your hand,
and take up, the juicing net will
automatically leave the rotor.
4. In order to avoid damage, before
using, first check power supply for
compliance with rated voltage.
5. Clean all parts able to disassemble
(refer to the section of "Maintenance
and cleaning").
6. When assembling, please carefully
read the diagram of "Name and
position of main components".
7. Please carefully read the
"attentions" before using.
Juicing
1. Before using, please confirm the
button switch of the main machine in
stop state, in this way, in case
assembly is not completed, starting
the main machine can be avoided, so
unnecessary damage for persons or
property avoided.
2. Before juicing, first confirm juicing
net and rotor clutched in position, and
no hard contact between juicing net
cutter and transparent cover. Put the
transparent cover on, put the handle
into the cover slot, then turn on the
machine.
3. For using, assemble according to
the diagram of "Name and position of
main components". Turn on power
supply, press switch to let the machine
run no-load for 5 sec. Put prepared
vegetable or fruit into feed port of the
juicer, press with the pushing bar,
evenly, hard and slowly, juice of the
vegetable or fruit can be found,
original, fresh, good for health.
4. Note: when pressing food with the
pushing bar, force shall be even or
indirect, pressing force shall not be
more than 1 kg, no too sudden force,
otherwise, juicing effect will be
reduced.
Operating time
This machine is designed with button
switches of 0 grading, 1 grading, 2
grading (0 for stop, 1 for weak
grading, 2 for strong grading). For
juicing, select strong grading, for
operating time, after operating for
1min, stop for 1min, then use again.
After the above operation is performed
for three times, stop for 15 min, do
not operate until the motor is cooled,
in this way, service life of this machine
will be prolonged, the machine will
serve you more efficiently.
Maintenance and cleaning
1. This machine shall be often used, so
as to keep the motor dry and clean.
2. If not using for a long time, please
store this machine at a dry and well-
ventilated place so as to prevent the
motor from being damped and going
moldy.
3. No washing the main machine.
When cleaning, only wipe with wet
cloth. Other components may be
washed directly with water, such as
pushing bar, cover, middle seat,
residue cup, juice nozzle.
Specifications:
Power: 600 W
Rated voltage: 220-240 V
Rated frequency: 50 Hz
Rated current: 2.7 А
Net weight: 2.70 kg
Gross weight: 3.40 kg
Ваш отзыв будет первым