- Тип техники
- Бренд
Просмотр инструкции соковыжималки Saturn ST-FP8087, страница 6
5
3. Align screen cylinder with the feed
cylinder (See Figure 3);
4. Take out rotor to align it with motor
shaft (See Figure 4);
5. Take the pushing rod and insert it
into surface cover (See Figure 5);
6. Keep the unlocking mark on surface
cover in alignment with the triangle
mark on the feed cylinder (See
Figure 6);
7. Rotate clockwise for tightening and
anticlockwise for loosening (See
Figure 7);
8. Optional juice-extracting mouth
assembly (See Figure 8).
Operation instruction
1. Ensure accessories are correctly
installed, juice receptor is below the
juice outlet and the pulp cup is in place.
Plug in the power cord.
2. In order to insert fruits into the feed
inlet easily, cut fruits into pieces.
Note:
A) Fruits with less juice are not
recommended, such as banana, apricot,
etc.
B) Nuts that would damage motor and
juicing screen such as cocoa should not
be used.
C) Unpitted fruits such as lemon and
grapes should not be juiced before
pitting. The core of pineapple should be
removed.
D) The product is not applicable for
fiber-rich fruit or vegetable, such as
sugar cane.
3. Press “START”.
4. Put fruit into feed inlet, push the rod
and squeeze fruit with infirm force.
Empty the cup when it is filled with juice
before next operation.
5. Juice in the transparent cylinder
should not exceed the maximum
capacity value.
6. To prevent product damage during
use, do not add hard object (such as
nut), fiber-rich foods (such as sugar
cane), less-juice foods (such as banana)
and non-food object to the feed inlet. If
food is stuck in the feed inlet, stop
operation, unplug the power cord, and
empty the pulp before next cycle of
work.
Note:
Keep finger or other objects away from
the feed inlet and, if the feed inlet is
stuck, clear it with pushing rod or other
fruit slice and, if failed, disconnect
power supply and remove fruit slices.
7. If the juice cup is filled or juicing is
finished, press “STOP”, and when the
spiral rotor stops rotation, empty the
juice cup, clean the feed cylinder and
screeners. Juicing period should not
exceed 20 minutes and, after 2-3
cycles, the product should be cooled
down before next cycle.
Note:
Before the juice cup is overfilled, stop
operation. Do not put too much fruit
and vegetables. Empty the juice cup
and food residue before next cycle.
8. If too much food is found in the
appliance, press “REVERSAL”, the rotor
will operate spirally to remove food, and
after operation stops, press “START” to
resume juicing.
9. After use, press “STOP”, unplug the
power cord, clean each part (except the
main machine), dry it and assemble
them, store in a safe place.
Ваш отзыв будет первым