Бесплатные инструкции на русском языке
  • Тип техники
  • Бренд

Просмотр инструкции пылесоса Saturn ST-VC1296, страница 4

Saturn
6
The suction
power can be
adjusted with the
sliding control on
the angled pipe.
Put the
extension tube
into the fixing
hook of the
appliance when
you have a
break.
Caution: Do not
transfer the
appliance when
the fixing hook is
used.
Cleaning tools
Crevice tool:
For cleaning corner
edge and draws,
etc.
Where is difficult to
reach, such as gaps
and the keyboard,
bookshelf and
windows.
Convertible brush:
Turn the crevice
tool 90°and attach
it on the extension
tube for cleaning
bed, sofa, curtain
etc.
Use of the selector
on floor brush:
Bristles extended
for carpets.
Bristles retracted
for hard floors.
If the angled pipe
has blockage,
insert it into the
air-intake and
switch the
appliance on.
Cleaning and maintenance
Empty the dust
container
(1) After removing
the flexible hose,
press the cover
lock button and
open the dust
container.
(2) Remove the
dust filter from the
container.
(3) Replace the
dust filter in the
container.
(4) Close the dust
7
container until it is
locked in the
position.
Change filter
Replace the motor
filter:
Open the dust
container and
remove the motor
filter. Fix the new
filter in the position
Replace the outlet
filter: Detach the
grille by pulling
firmly away from
the appliance,
remove the outlet
filter and replace
the new filter. Fix
the grille again.
Clean the filter
Clean the filter in
water and allow
them to dry
completely before
replace them.
Clean the cloth
dust bag
Clean the cloth
dust bag with
water and a little
detergent (if
needed). Allow
the bag to dry
completely before
replacing.
Error detection:
Before you contact our services center,
please check the following points:
Problem Possible
reason
Active
Motor does
not start
-Power
card not
firmly
plugged
into outlet
-Outlet
damaged
-Cleaner
not switch
on
-Plug unit
firmly
-Check the
outlet
-Switch on
the
appliance
Suction
power is
weaker
-Unit
clogged
-Dust filter
needs
cleaning
-Dust
container
not in
position
-Filter
blocked
-Remove
the
blockage
-Clean the
dust filter
-Close the
dust
container
-Clean the
filter
The wire
cannot be
winded
completely.
The wire
may
diverge
the wire
wheel
Draw the
wire a
little then
rewind
Ваш отзыв будет первым
Задайте вопрос
Ваше имя
E-mail
Вопрос*
Ваш вопрос будет опубликован после проверки
Ваш вопрос опубликован