- Тип техники
- Бренд
Просмотр инструкции пылесоса Saturn ST-VC1288, страница 3
4
4. Do not use the appliance on wet
surfaces.
5. Do not obstruct the air intake or
outlet vents.
6. Do not use the appliance to vacuum
needles, drawing-pins or string.
ASSEMBLYING THE VACUUM
CLEANER
Always remove the plug from the
power socket before fitting or
removing accessories.
Fitting the flexible tube
Insert the flexible tube into the air
intake duct on the appliance. To do
this, slide the intake duct cover, insert
the tube and press until it clicks into
position.
Removing the flexible tube
Remove the plug from the power
socket. To release the flexible tube,
press the button on the end of the
tube firmly the air intake duct.
Fitting the extension tubes and
accessories
INSTRUCTION FOR USE
1. Before using the appliance, unwind
length of cable and insert the plug into
the power socket. A YELLOW mark on
the power cable shows the ideal cable
length. Do not extend the cable
beyond the RED mark.
To rewind the power cable, press the
rewind button with one hand, and
guide the other hand to ensure that it
does not whip causing damage.
5
2. Press the ON/OFF button to switch
the appliance on. It is advisable to set
the electronic power regulator to MIN,
before switching on the appliance.
3. By turning the speed control knob,
the absorption power can be adjusted.
USING THE CLEANING ACCESSO-
RIES
Dual-position carpet/floor brush
Pos. 1: bristles extended, for hard
floors
Pos. 2: bristles retracted, for carpets
Narrow nozzle
For cleaning radiators, corners, edges,
drawers, etc.
Small brush
For cleaning furniture, curtains, book
shelves, lamp shades and other
delicate objects.
CLEANING THE DUST BAG
1. After removing the flexible tube,
open front cover by pressing the
button and putting upwards.
2. Remove the dust bag.
3. Clean the dust bag and put it back.
CLEANING THE MOTOR FILTER
When the motor filter is dirty, remove
the filter and wash carefully in water.
Allow the filter to dry completely
before replacing it.
Ваш отзыв будет первым