- Тип техники
- Бренд
Просмотр инструкции пылесоса Saturn ST-VC0263, страница 3
4
5. Do not place it near heat sources.
6. Do not use the appliance to vacuum
needles, drawing-pins or string.
ASSEMBLYING THE VACUUM
CLEANER
Always remove the plug from the
power socket before fitting or
removing accessories!
Fitting the flexible tube
Insert the flexible tube into the air
intake duct on the appliance. To do
this, slide the intake duct cover, insert
the tube and press until it clicks into
position.
Removing the flexible tube
Remove the plug from the power
socket. To release the flexible tube,
press the button on the end of the
tube firmly the air intake duct.
Fitting the extension tubes and
accessories
INSTRUCTION FOR USE
1.Before using the appliance, unwind
length of cable and insert the plug into
the power socket . Тhe Yellow mark on
the power cable shows the ideal cable
length .
Do not extend the cable beyond the
RED mark.
To rewind the power cable, press the
rewind button with one hand or one
foot, guide the other hand to ensure
that does not whip causing damage.
If the power cable can’t be rewinded
completely, pull out the power cable a
little and press the rewinder button
again. You can repeat the rewinding
steps until the cable is rewinded
completely.
2.Press the ON/OFF button to switch
the appliance on.
5
USING THE CLEANING ACCESSO-
RIES
Dual-position carpet/floor brush
Pos. 1: bristles extended, for hard
floors
Pos. 2: bristles retracted, for carpets
Narrow nozzle
For cleaning radiators, corners, edges,
drawers, etc.
Small brush
For cleaning furniture, curtains, book
shelves, lamp shades and other
delicate objects.
ATTENTION
In order to reach high-level efficiency
ashier cleaning, please clean the floor
brush regularly.
Air-Blow Function (additional
function)
• You may convert your machine to
blow air out by attaching the Flexible
Hose to the machine's air outlet socket
(remove the Air Outlet Grill.).
• The Blower Function is
recommended for use to gather
scattered dry waste such as leaves
and confetti.
CAUTION: This Blowing function is
just an additional, substandard,
unofficial function of this cleaner.
So we recommend you to use this
function quick and in a short time
for each use. The flexible hose and
handle may become very hot after
a long time use, at that time, you
should stop to use this function,
after several minutes, when it
becomes cool, then use again.
AFTER USING
You may fix the stand for floor brush
onto the vacuum cleaner.
HOW TU CLEAN THE DUST CABIN
1. After removing the flexible tube,
push on the dust cup release button.
2. The dust is dropped out when the
dust cabin lock button is pressed.
3. To turn the cover of dust cabin,
take out HEPA, to clean up HEPA;
4. To take out and clean the cyclone
segregator when the dust is filled in
Ваш отзыв будет первым