- Тип техники
- Бренд
Просмотр инструкции стиральной машины Saturn ST-WM0603, страница 3
Circuit diagram
Instructions for operation
Beginning the washing
1. The socket must be grounded.
2. Lay down the discharging tube to
assure good discharging.
3. Insert the plug into the socket.
4. Connect the water introducing tube:
insert the introducting water elbow into
the water gate on the washing machine
until you hear the click.
Finishing the washing
1. Discharging water completely.
2. Pull the pug out of the socket.
3. Take out the de-hair device inside the
machine and clean it.
4. Open the lid and tub dry in the air.
Washing instructions
1. Filling water: adjust to the expected
water level with the handle of water
level adjuster.
2. Put in washing powder: selecting
washing time. For the detailed
information, please refer to the guide
for customers.
3. Put in clothes: the clothes must be
under the water level and add more
water in time if necessary.
4. Select water flow: select
corresponding water flow. For the
detailed information, please refer to the
guide for customers.
5. After the washing finish, discharging
water.
Attention
1. If there has amount of water in the
tub, it would spill out of the tub.
2. In order to prevent damage or
deforming of washings, better to tie up
some long washings, such as skirts or
pull up all zippers.
3. Pretreating method just as the figure
shown.
4. All pockets should be empty. If not,
take coins, nail etc. out of them.
5. Hairy balls, collars should be turned
inside.
6. Fast color washing should be washed
separately.
Guide for customers
Standart of the washing time
Washing
Capacity
Water
Flow
Washings
Washing
Time
Below
2.0kg
Middle
(20L)
Low
(17L)
Thin
chemical
fiber
3-4 min
Chemical
fiber
4-6 min
Kapok,
hemp
9-11
min
Normal agent amount used for
washing
Washing
Capacity
Water
Level
Normal
Condensed
One
Normal
One
Below
2.0kg
Low
(17L)
25g
40g
Different class of washing, different
selection of corresponding washing
agent.
Please don’t use excessive amount of
washing agent. It would cause waste
and affect washing effect.
Agent used for woolen sweater
Washing
Amount
Water
Level
(volume)
Normal Amount
Condensed
Normal
Below
2.0kg
Low
(20L)
7ml
20ml
1. Correctly select the volume of agent.
Please refer to the list.
2. Method: please use it according to
the method of washing soft articles.
3. When wash the fine woolen fabric,
please select the special agent.
Washing powder
Directly dissolving the washing powder.
1. Put in washing powder when the
water level is low.
2. Trun the switch to the position of
standard.
3. Start the machine and stur the water
for 1 min.
4. After the washing powder dissolves,
put in washings and introduce water to
expected level.
5. Select correct washing time.
Washing method for woolen fabric
For fine woolen fabric, the purely made
of rabbit long hairs and wool.
Don’t wash them directly in the tub.
1. Select water lebel for introducing
water: put warm warm water of 30C
and select proper water bebel.
2. Putting in washing agent: for the
washing agent, please refer to washing
agent for wollen fabric. In order not to
damage the fabric of pure animal hairs,
please use neutral washing agent
without ferment.
3. Putting in washings: woolen washings
shoujld be put into the net and washed
on their reverse sides.
4. Washing: wash them with weak water
flow for 2 mins, then introduce water to
rinse them for 2 mins, take them out,
flatten them and keep them in good
shape. Don’t dry them in the sun but
dry them in cloundy days.
Washing
Capacity
Weater
level
Water
flow
Below 2.0kg
Middle
Soft
Below 1.0kg
Low
Washing the woolen blanket
Washing pure woolen blanket and
electric blanket are absolutely
forbidden.
1. Fold the blanket four times in upright
direction, tehn roll it up and put it into
the net bag.
2. Put the blanket into the washing rub
and press it lightly with hand so as to
make it full of water and sink down to
the water bottom.
3. According to the weight and volume
of the blanket, adjust the water level.
4. Select washing time and start
washing. Sometimes the washings
would make water inside the tube
spilling out. It is better to cover the tub
with the lid.
Maintenance
1. Please pull the plug out of the socket
(don’t touch the socket when your
hands are wet and put it at the correct
position).
2. After discharging the water in the
tub, please move the switch form
discharge to standard.
3. Clean the de-hair device:
1) Take out the de-hair set, dismantle
it with a ginger pressing the inside
bottom.
2) Put the de-hair set in water to
clwan.
3) After clwaning, restore the de-hair
device, insert it into the slat under
the water level side board. A click
should be heard.
4. Pick up the water introducing tube
and hang the discharging tube.
5. Clean the housing of the machine,
wipe it thoroughly, and wipe out the
dirty with chemicals, such as alcohol,
eradicator, acetone, gas, etc. When it is
very dirty, please use neutral liquid soap
to clean.
6. Close the lid, placed the machine at
the ventilation in the room.
WARNNING
Water is not allowed to enter the inner
part of the machine directly. Otherwise,
the electric motor will conducted by
electricity. This is the real why
sometimes the electric sroke may
happen.
Specification
Rated Wash Input Power:170 W
Rated Voltage: 220-230 V
Rated Frequency: 50 Hz
Rated Current: 0.8 А
Max. Capacity: 2kg
Set
Washing machine 1
Instruction manual
with warranty book 1
Package 1
ENVIRONMENT FRIENDLY
DISPOSAL
You can help protect the
environment!
Please remember to respect
the local regulations: hand in
the non-working electrical
equipment to an appropriate
waste disposal center.
The manufacturer reserves the right
to change the specification and
design of goods.
4 5
Ваш отзыв будет первым