- Тип техники
- Бренд
Просмотр инструкции масляного обогревателя Polaris PRE C 1129 HF, страница 10
Before first use
Wheels installation
• Before using the radiator, install wheels on it.
• Turn over the radiator to have access to bottom panel. Make sure that the device is on a flat
surface and there is nothing to scratch the surface of radiator.
• If the radiator has 7 or 9 fins, install the wheels plate between first and second fin each side, as
shown at figure 1.
• If the radiator has 11 fins, install the wheels plate between second and third fin each side.
• Tighten the nuts on wheels. Turn over the radiator and put on wheels as shown at figure 2.
Attention! The radiator should always be placed in vertical position to reduce the risk of
overheating, fire or electric shock.
The installation of towel-
rack
1. The towel-rack slots
should be joined with
the fin edges as shown
in the picture (figure 3
A).
2. You should push
slightly the towel-rack to
make it firmly join
together. (figure 3 B)
The radiator operation
• The radiator must be operated on a stable flat.
• Before plugging the device in power socket, please make sure, that the power control is in the
OFF position and the thermostat control in the LOW position.
• Choose the heating power (I, II or III) with power regulator.
• Set the thermostat control in HIGH position.
• If you want to keep the constant temperature please rotate the thermostat controller anti-
clockwise till the indicator go out. From this moment the radiator will continue to work
automatically keeping the constant temperature using efficiently the electric power.
• If you want to change the temperature please rotate the thermostat controller clockwise – to
make the temperature go up, anti-clockwise – to make the temperature go down.
• If you want to turn off the radiator please switch all controllers to OFF position.
Fig. 1
Fig. 2
Towel-rack
Plastic rails
А В
Figure 3
Radiator fins
The towel-rack leg
Ваш отзыв будет первым