- Тип техники
- Бренд
Просмотр инструкции масляного обогревателя Polaris PRE R 0715, страница 13
13
Before the first use
Get the radiator out of the box and place it on the foam plastic cover. Make sure whether the power
cable and the device were not damaged during the transportation.
Assembly instruction
• The roller-legs should be installed before operating the radiator.
• Turn over the radiator to have access to bottom panel. Make sure that the device is on a flat
surface and there is nothing to scratch the surface of radiator.
• Put the wheels assemblies onto the radiator by placing the U-shaped bolts between the outermost
fins on each side of the radiator. If the radiator has 7 or 9 fins, install the wheels plate between
first and second fin each side, as shown at figure 1
• Securely fasten the wheels assemblies onto the radiator by screwing the wing nuts onto the bolts.
• Turn over the radiator in normal position and put it in vertical position.
Warning! Please operate the radiator in normal vertical position. Any other position can
create a hazardous situation.
Wheels installation
Attention! The radiator should always be placed in vertical position to reduce the risk of
overheating, fire or electric shock.
Operation of the appliance
Make sure that the radiator is placed in vertical position to reduce the risk of overheating, fire
or electric shock.
Don’t switch on the appliance in case it is damaged
• Before plugging the device in power socket, please make sure, that the power control is in the
OFF position and the thermostat control in the LOW (MIN) position.
• Press the power switch buttons to the relevant necessary position:
only button I is pressed – low power
only button II is pressed – medium power
both buttons are pressed (III position) – high power mode.
Fig. 1
Fig. 2
Документ создан с помощью незарегистрированной версии pdfFactory Pro www.pdffactory.com
Ваш отзыв будет первым