- Тип техники
- Бренд
Просмотр инструкции стиральной машины Electrolux EWT 2853 EWW, страница 13
CAUTION!
If the temperature and level
of the water in the drum are
too high, you cannot open
the lid.
Open the lid during the first 10
minutes of the cycle and when the
delay start operates:
1. Press the to pause the appliance.
2. Wait until the lid lock indicator
goes off.
3. You can open the lid.
4. Close the lid and press the again.
The programme (or the delay start)
continues.
Open the lid when the programme
operates:
1. Turn the programme knob to position
to deactivate the appliance.
2. Wait for some minutes and then open
the appliance lid.
3. Close the lid and set the programme
again.
10.10 At the end of the
programme
• The appliance stops automatically.
• The acoustic signal operates (if it is
activated).
• The indicator of the button goes
off.
• The lid lock indicator goes off.
• The indicator is on.
• You can open the lid.
• Remove the laundry from the
appliance. Make sure that the drum is
empty.
• Close the water tap.
• Turn the programme knob to position
to deactivate the appliance.
• Keep the lid ajar, to prevent the
mildew and odours.
The washing programme is
completed, but there is water in the
drum:
• The drum turns regularly to prevent
the creases in the laundry.
• The lid lock indicator is on. The
indicator flashes. The lid stays
locked.
• You must drain the water to open the
lid.
To drain the water:
1. If necessary, decrease the spin
speed. If you set , the appliance
only drains.
2. Press
. The appliance drains the
water and spins.
3. When the programme is completed
and the lid lock indicator goes
off, you can open the lid.
4. Turn the programme knob to position
to deactivate the appliance.
The appliance drains and
spins automatically after
approximately 18 hours
(except for Wool
programme).
10.11 Stand-by
Some minutes after the end of the
washing programme, if you do not
deactivate the appliance, the energy
saving status activates.
The energy saving status decreases the
energy consumption when the appliance
is on the stand by.
• All indicators go off.
• The indicator of the flashes
slowly .
• Press one of the options to deactivate
the energy saving status.
If you set a programme or an
option that ends with water
in the drum, the energy
saving status function
doesn't activate to remind
you to drain the water.
ENGLISH 13
Ваш отзыв будет первым
Вопросы пользователей
Поиск:
по производителю
по типу техники
по модели
Сортировать:
по дате
c ответами
0