- Тип техники
- Бренд
Просмотр инструкции часов Vitek VT-3519 SR, страница 5
5
E N G L I S H
– Alarm actuation is possible only when
the device is connected to the mains.
Switching the alarm on/off
1. To switch the alarm (alarms) on press and
hold the button (5)
/(6) until the cor-
responding symbols appear on the display.
2. To switch the alarm (alarms) off again press
and hold the same button.
Alarm snooze
1. You can switch off the alarm signal for 9 min-
utes by pressing the button 14 «SNOOZE/
SLEEP». In 9 minutes the alarm signal will
be repeated.
2. To switch off alarm sound signal press the
button (4) «ON/OFF» or the button of the
corresponding alarm (5)
or (6) .
Note: The alarm signal will be continued
during 30 minutes if you do not press any
buttons.
Display (2) brightness setup
1. Plug the device into the mains.
2. Set up the necessary display brightness by
pressing the button (14) «DIMMER» repeat-
edly.
Timer
You can set up the time for the automatic sound
of nature of radio to switch off.
1. Connect the device to the mains and press
the button (4) «ON/OFF».
2. Press the button (14) «SNOOZE/SLEEP».
«SLEEP», «90» symbols will appear on the
display which means automatic switching
off in 90 minutes.
3. Set up the necessary switch-off time (with
step of 10 minutes) again pressing the but-
ton (14) «SNOOZE/SLEEP». After the device
goes to the current operation mode «SLEEP»
symbol will appear on the display.
4. To switch the timer off press the button (14)
«SNOOZE/SLEEP»» repeatedly until «OFF»
symbol appears on the display (2) or switch off
the device pressing the button (4) «ON/OFF».
Adjusting volume level
Use buttons (10) «-» and (11) «+» to set up the
desired volume level.
«AUX IN» (20) jack
You can listen to the sound signal from the
external device through the radio clock speaker.
To connect the external device use the jack (20)
«AUX IN».
1. Connect the external device using the 3.5
mm audio cable (not supplied with the
device).
2. Connect the device to the mains and press
the button (4) «ON/OFF», symbol «AU» will
appear on the display for a short time.
Radio stations reception
1. Connect the device to the mains and press
the button (4) «ON/OFF».
2. Press the button (3) «FUNCTION» to select
the radio mode «FM».
3. Use the buttons (8) and (9) for tuning to the
desired radio station.
Manual setup: consequently press the buttons
(8) and (9) to select the desired radio station
with step 0.1 MHz in Fm mode.
Automatic selection: press and hold the
buttons (8) and (9) for more than 1 second. The
tuner shall begin scanning and automatically
stop it when finding the closest strong signal
from radio station.
4. To exit from the radio mode press the button
(3) «FUNCTION» by selecting the «sounds
of nature» mode к switch off the device by
pressing the button (4) «ON/OFF».
Antenna (21)
Select the antenna (21) position for quality
acceptance of radio signal.
Radio stations recording
You can set up and save 10 radio station in FM
band.
1. Tune to the station you want to record.
2. Press the button (7) «MEM TIME» until a
flashing symbol of «M--» radio channel
appears.
3. Consequently press the buttons (8) and (9),
select the channel number you wish to save
the radio station under.
4. Again press the button (7) «MEM TIME» to
save made settings.
5. Repeat steps 1–4 for all radio station fre-
quency of which you wish to save in the
memory of the audio recorder.
6. To select the preliminary recorded radio
VT-3519 IM.indd 5 25.12.2013 10:57:04
Ваш отзыв будет первым