- Тип техники
- Бренд
Просмотр инструкции машинки для стрижки Philips HQC888/00, страница 10
Replacement
A worn or damaged cutting unit should only be replaced with an
original Philips cutting unit.
1 Open the cutting unit by applying pressure in the centre and then
remove it by pulling it upwards (fig. 9).
2 Place the two lugs of the new cutting unit into the guiding slots
and push the unit back onto the appliance (fig. 10).
Environment
The built-in rechargeable battery contains substances which may
pollute the environment.
Remove the rechargeable battery when you discard the appliance.
Do not throw the battery away with the normal household waste but
dispose of it at an official collection point.
You can also take the appliance to a Philips service centre, which will
remove the battery for you and will dispose of it in an environmentally
safe way.
1 Disconnect the appliance from the mains and let the appliance
run until the motor stops.
2 Open and remove the cutting unit (See chapter 'Cleaning').
3 Undo the screws and remove the metal clip by means of a
screwdriver (fig. 11).
4 Remove the top part by pulling it off the appliance (fig. 12).
5 Turn the zoom ring until the comb holder is in its highest
position (fig. 13).
6 Then use some force to turn the zoom ring still further until the
comb holder comes loose from the appliance (fig. 14).
7 Separate the two housing parts by means of a screwdriver (fig.
15).
ENGLISH10
Ваш отзыв будет первым