Бесплатные инструкции на русском языке
  • Тип техники
  • Бренд

Просмотр инструкции пульты Philips SRP1001, страница 5

Philips
Automatically setting the remote control
If you cannot find the right code for your brand device, the remote
control can automatically search for the right code.
1 Make sure the TV is switched on and select a channel using
the original remote control or the keys on the TV (for
example channel 1).
2 Keep keys 1 and 3 on the SRP 1001
SRP 1001 pressed simultaneously for
five seconds, until the indicator light
remains lit.
3 Press the y key of the SRP 1001 .
and keep it pressed
The SRP 1001 now starts emitting
all known ‘TV off signals, one by
one. Each time a code is sent, the
indicator light flashes.
4 When your TV switches off
(stand-by), immediately release the
y key of the SRP 1001 to confirm.
The SRP 1001 has now found a
code that works on your TV.
5 Check if you can operate all
functions on your TV with the SRP 1001.
If this is not the case, you can redo the automatic
setting. The SRP 1001 will then search for a code that
perhaps works better.
After the SRP 1001 has run through all the known codes, the
search will stop automatically and the indicator light stops
flashing.
Automatic programming of a TV takes a maximum of 6
minutes.
5
English
Installing the remote control
EN
5 sec.
SRP1001_10_Transfer:125254c4_SRU5110_86 19-06-09 15:15 Pagina 5
Ваш отзыв будет первым
Задайте вопрос
Ваше имя
E-mail
Вопрос*
Ваш вопрос будет опубликован после проверки
Ваш вопрос опубликован

Смотрите также другие инструкции раздела Пульты

Наверх