- Тип техники
- Бренд
Просмотр инструкции радар-детекторы Crunch 2191, страница 13
Basic Features and Controls
Installing the Unit
MOUNTING GUIDELINES
The CRUNCH 2191 can be mounted on your windshield or dashboard
using the mounting bracket or hook and loop fastener provided.
sMount on the windshield in a centered location that will
not obstruct the view of the driver and is within reach, so
the buttons can be easily accessed.
sDo not mount behind windshield wipers, metal surfaces,
ornaments, or mirrored sunscreen glass, as these affect
radar/laser signals. Tinted glass does not affect radar/laser signal
reception.
Conceal the CRUNCH 2191 when you leave your vehicle to prevent
theft and to minimize the unit's exposure to extreme temperatures, which
can temporarily impair performance.
WINDSHIELD MOUNTING
1.Install the suction cups and bumper onto the windshield mounting
bracket by sliding them into their holes (if not pre-installed).
2.Press the bracket base firmly against the windshield until the suction
cups securely take hold.
3.Fasten the bracket at the top sides’ slots of the unit.
4.Bend the angle of the windshield mounting bracket, if necessary, to
adjust for best viewing and detection angle.
5.When you want to connect power
from your vehicle, plug the small connector of the power cord into the
12-voltDC power input jack located on the side of the detector.
6.Plug the large adapter of the
power cord into the lighter
socket of your vehicle.
DASHBOARD MOUNTING
1.Select an area relatively level, clean, and dry. Adhere one part of the
enclosed hook-and-loop fastener to this area and the other part to the
bottom of the unit.
13
16
Ваш отзыв будет первым