Бесплатные инструкции на русском языке
  • Тип техники
  • Бренд

Просмотр инструкции автомагнитолы Soundmax SM-CDM1036, страница 14

Soundmax
14
Loud mode
Press and hold for 3 seconds the LOUD/TA button on the RC to increase bass output.
Stereo mode
Press the ST/AF button on the remote control to select stereo or mono reception for FM radio stations.
Stereo reception is activated when “AF” appears in the display.
Note: You can sometimes improve reception of distant stations by selecting mono mode.
Local/Distant mode
Press the LOC/DX/PTY button on the remote control to switch between Local and Distant (DX) tuning mode.
The unit is set to PTY mode when the PTY button is first pressed. “PTY” appears in the display, and only
local stations are available. The unit is switched to DX mode when the LOC/DX/PTY button is pressed again.
Both distance and local stations can be received.
Radio functions setting
Press and hold for 2 seconds the SEL button to select the setting: TA SEEK => MASK DPI => RETUNE L =>
DSP OFF => LOUD OFF => ESP 12 => MULT OFF => BEEP OFF => SEEK 1 => STEREO => DX.
Rotate the VOL knob to adjust each setting.
a. TA (Traffic Announcement) mode. You can chose TA ALARM or TA SEEK. The function refers to RDS and
may not be available in your region.
To determine what action will the radio take if the newly tuned station does not receive TP (Transport
Program) information for 5 seconds.
There are 2 modes: TA ALARM and TA SEEK.
TA SEEK: During searching the radio retunes to a different station, which contains TP information.
TA ALARM: During searching the radio does not retune but beeps will come out.
b. Mask mode
“DPI” is referred to “Different PI (Program Information) with same AF (Alternative Frequency)”.
During AF search, PI stations and non-RDS (Radio Data Station) stations with strong signal will be
masked, in the latter case, the non-RDS stations may cause interference, resulting the real AF to be
masked due to the misjudgment of the radio under interference.
MASK DPI: To mask only the AF with different PI.
MASK ALL: To mask both PI and strong signal non-RDS station.
Ваш отзыв будет первым
Задайте вопрос
Ваше имя
E-mail
Вопрос*
Ваш вопрос будет опубликован после проверки
Ваш вопрос опубликован

Смотрите также другие инструкции раздела Soundmax