- Тип техники
- Бренд
Просмотр инструкции газонокосилки Al-ko CLASSIC 4.64 SP-S PLUS, страница 30
GB
Translation of the original operating instructions
30
Petrol lawn mower
Blade clutch (option)
Blade clutch
On Off
The blade clutch allows the cutter blade to be engaged
and disengaged while the motor is running.
Engaging the cutter blade
1. Pull the safety bar to the upper bar and hold (
17) - safety bar does not engage.
2. Push the coupling lever away from you ( 21/1)
- cutter blade is engaged.
Disengaging the cutter blade.
3. Release the safety bar (
25).
- cutter blade is disengaged.
- clutch lever goes to resting position (
21/2).
Electric start without primer/choke (
15)
1. Set gas lever to position "START" (
15/1).
2. Pull the safety bar to the upper bar and hold (
17) – safety bar does not engage.
3. Turn ignition key in ignition switch to the right
completely (
19).
4. As soon as the motor is running, release the igni-
tion key (it jumps back to position "0").
5. Set the gas lever to a position according to the de-
sired motor speed between
and ( 15/2).
Wheel drive (option) ( 22)
Attention!
Engage the transmission only when the motor is
running.
Switching on the wheel drive
1. Press and hold the transmission control lever
against the upper handle bar (
22) – the trans-
mission control lever does not engage.
- wheel drive is switched on.
Switching off the wheel drive
1. Release the safety bar ( 24).
- wheel drive is switched off.
Device with blade clutch
Blade clutch
On Off
1. Release the safety bar ( 25).
2. Set speed lever to position
( 20/2).
- Motor switches off.
Danger severe cutting injuries!
The motor may coast down. After deactivation,
make sure that the motor is at a standstill.
Switching off the motor
Device without blade clutch
1. Set speed lever to position ( 20/2)
2. Release the safety bar (
25).
- Motor switches off.
Danger severe cutting injuries!
The motor may coast down. After deactivation,
make sure that the motor is at a standstill.
5. As soon as the motor is running, release the igni-
tion key (it jumps back to position "0").
6. Set the gas lever to a position according to the de-
sired motor speed between
and ( 15/2).
Vario gearbox (option)
Vario gearbox
Fast Slow
Ваш отзыв будет первым