- Тип техники
- Бренд
Просмотр инструкции автомойки Karcher CB 2 25, страница 38
- 16
50 Limit switch FA (drive start) has not been
exited despite driving command
Limit switch activated through foreign
metal or is defective
Check limit switch portal driving for de-
fects; remove metal parts from the hall
floor; switch off/on the unit, repeat washing
process
51 Limit switch FA (Drive start) has not
reached expected position
52 Limit switch FE (drive end) has not been
exited despite driving command
53 Limit switch FE (Drive end) has not
reached expected position
54 Travel command has been given but
SB1A (side brush 1, outward) limit switch
has not been exited
Limit switch activated through foreign
metal or is defective, drive wheel is
turning
Check limit switch of side brushes for de-
fects; clean upper running surface of the
side-brush holder; switch off/on the unit,
repeat washing process
55 Limit switch SB1A (side brush 1, outward)
has not reached expected position
Limit switch defective, drive wheel is turn-
ing
56 Travel command has been given but
SB1E (side brush 1, driven-in) limit switch
has not been exited
57 Limit switch SB1E (side brush 1, driven-
in) has not reached expected position
58 Travel command has been given but
SB2A (side brush 2, outward) limit switch
has not been exited
59 Limit switch SB2A (side brush 2, outward)
has not reached expected position
60 Travel command has been given but
SB2E (side brush 2, driven-in) limit switch
has not been exited
61 Limit switch SB2E (side brush 2, driven-
in) has not reached expected position
62 Travel command has been given but DBO
(top roof brush) limit switch has not been
exited
Limit switch is defective Check limit switch for damages, switch on/
off the unit, repeat washing process
63 Limit switch DBO (top roof brush) has not
reached expected position
66 Travel command has been given but DBU
limit switch (lower roof brush) has not
been exited
67 Limit switch DBU (lower roof brush) has
not reached expected position
68 Travel command has been given but TRO
(upper roof drier) limit switch has not been
exited
69 Limit switch TRO (upper roof drier) has
not reached expected position
70 Travel command has been given but TRU
(lower roof drier) limit switch has not been
exited
71 Limit switch TRU (lower roof drier) has not
reached expected position
80 Roof brush alignment too high Cable, motor or gears of rotary roof
brushes defective
Switch off and switch on the unit, repeat
washing process, call Customer Service
81 Roof brush alignment too low
83 Roof brush performance during the wash
too low
84 Side-brush 1 alignment too high Cable, motor or gears of rotary side
brush 1 defective
85 Side-brush 1 alignment too low
87 Side-brush 1 performance during the
wash too low
88 Side-brush 2 alignment too high Cable, motor or gears of rotary side
brush 2 defective
89 Side-brush 2 alignment too low
91 Side-brush 2 performance during the
wash too low
100 Wheel wash 1 does not drive back to base
setting
No compressed air, wheel wash has
got jammed in the rim
Check compressed air supply and com-
pressor; switch off the unit and remove the
wheel wash from the rim; repeat washing
process
101 Wheel wash 2 does not drive back to base
setting
Display Fault Possible cause Remedy
38 EN
Ваш отзыв будет первым
Вопросы пользователей
Поиск:
по производителю
по типу техники
по модели
Сортировать:
по дате
c ответами
Посетитель_Ze55of
13 июля 2022, Новосибирская
ИНСТРУЦИЮ К ЭКСПЛУАТАЦИИ
0 ответов
Ответить
0