- Тип техники
- Бренд
Просмотр инструкции автомойки Karcher CB 1 28, страница 28
28 English
Dis-
play
Fault Possible
cause
Remedy
1 Limit switch Drive start/Drive end iIlogically allocated Limit switch al-
located or de-
fective via
foreign metal
part
Remove foreign
part.
4 Limit switch side-brush 1 inside/outside iIlogically allocated
5 Limit switch side-brush 2 inside/outside iIlogically allocated
6 Limit switch roof brush above/below iIlogically allocated
10 Limit switch roof drier above/below iIlogically allocated
50 Travel command has been given but gantry travel start (GTS) limit switch has not been ex-
ited
Failure in the
control.
Drive vehicle
out of the plant,
switch off main
switch, wait for
10 seconds,
switch on main
switch again,
press Reset
button, press
button Normal
setting, repeat
washing proce-
dure.
51 Gantry travel start (GTS) limit switch not reached
52 Travel command has been given but gantry travel end (PFE) limit switch has not been exited
53 Gantry travel end (PFE) limit switch not reached
54 Travel command has been given but side brush 1 start (SB1_a) limit switch has not been
exited
55 Limit switch for side brush 1 start (SB1_a) not reached
56 Travel command has been given but side brush 1 end (SB1_e) limit switch has not been
exited
57 Limit switch for side brush 1 end (SB1_e) not reached
58 Travel command has been given but side brush 2 start (SB2_a) limit switch has not been
exited
59 Limit switch for side brush 2 start (SB2_a) not reached
60 Travel command has been given but side brush 2 end (SB2_e) limit switch has not been
exited
61 Limit switch for side brush 2 end (SB2_e) not reached
62 Travel command has been given but top roof brush limit switch (DBO) has not been exited
63 Upper roof brush limit switch (DBO) not reached
66 Travel command has been given but lower roof brush limit switch (DBU) has not been exited
67 Lower roof brush limit switch (DBU) not reached
68 Travel command has been given but upper roof drier limit switch (TRO) has not been exited
69 Upper top roof drier limit switch (TRO) not reached
70 Travel command has been given but lower roof drier limit switch (TRU) has not been exited
71 Lower roof drier limit switch (TRU) not reached
80 Roof brush adjustment, power measurement too high
81 Roof brush adjustment, power measurement too low
82 Roof brush adjustment, power measurement deviation from previous value too high
83 Roof brush power take-up during the wash too low
84 Side-brush 1 alignment, power measurement too high
85 Side-brush 1 alignment, power measurement too low
86 Side brush 1 alignment, power measurement deviates too greatly from previous value
87 Side brush 1 power take-up during the wash too low
88 Side-brush 2 alignment, power measurement too high
89 Side-brush 2 alignment, power measurement too low
86 Side brush 2 alignment, power measurement deviates too greatly from previous value
91 Side brush 2 power take-up during the wash too low
Ваш отзыв будет первым