- Тип техники
- Бренд
Просмотр инструкции материнской платы Gigabyte GA 8IG1000MK rev 1 x, страница 87
Appendix- 83 -
English
Question 7: Why cannot I use the IDE 2?
Answer: Please refer to the user manual and check whether you have connected any cable that is
not provided with the motherboard package to the USB Over Current pin in the Front USB Panel.
If the cable is your own cable, please remove it from this pin and do not connect any of your own
cables to it.
Question 8: Sometimes I hear different continuous beeps from computer after system boots up.
What do these beeps usually stand for?
Answer: The beep codes below may help you identify the possible computer problems. However,
they are only for reference purposes. The situations might differ from case to case.
J AMI BIOS Beep Codes
*Computer gives 1 short beep when system boots successfully.
*Except for beep code 8, these codes are always fatal.
1 beep: Refresh failure
2 beeps: Parity error
3 beeps: Base 64K memory failure
4 beeps: Timer not operational
5 beeps: Processor error
6 beeps: 8042 - gate A20 failure
7 beeps: Processor exception interrupt error
8 beeps: Display memory read/write failure
9 beeps: ROM checksum error
10 beeps: CMOS shutdown register read/write error
11 beeps: Cache memory bad
J AWARD BIOS Beep Codes
1 short: System boots successfully
2 short: CMOS setting error
1 long 1 short: DRAM or M/B error
1 long 2 short: Monitor or display card error
1 long 3 short: Keyboard error
1 long 9 short: BIOS ROM error
Continuous long beeps: DRAM error
Continuous short beeps: Power error
Ваш отзыв будет первым