- Тип техники
- Бренд
Просмотр инструкции материнской платы Gigabyte G1 Assassin rev 1 0, страница 21
- 21 - Hardware Installation
1-7 Installing the 5.25" Front Access Control Panel
• Turn off your system and the power switch on the power supply before installing or removing the
Front Access Control Panel and signal/power cable to prevent damage to hardware.
• Insert the signal cable/power cable securely into the corresponding connectors when installing.
The 5.25" Front Access Control Panel allows quick and easy access to USB 3.0/2.0 ports and Power eSATA.
It also provides a Quick Boost button that allows you to quickly overclock your CPU in the operation system
without the need for a system reboot.
Follow the steps below to install the Front Access Control Panel:
The 5.25" Front Access Control Panel kit
(Note 1)
includes one 5.25" Front Access Control Panel
and eight screws used for fastening the panel
to the chassis sides.
Step 1:
Install the Front Ac-
cess Control Panel
into a free 5.25" bay
of your chassis. Then
tighten the included
screws to both sides
of the chassis.
Step 2:
Connect the Quick
Boost button's cable
to the OC_BUTTON
header on the moth-
erboard.
(Note 2)
5.25" Front Access Control Panel
USB 3.0/2.0 PortsPower eSATA PortQuick Boost Button
Step 3:
Co n n e c t t h e U S B
3.0/2.0 ports' cable to
the F_USB30_1 or F_
USB30_2 header on
the motherboard.
Step 4:
Connect the Power
eSATA power cable
to Pin 1, 3, 5, and 7
of the F_USB1 or F_
USB2 header on the
motherboard. Be sure
to connect it in the
correct orientation.
Step 5:
Connect the Power eSATA signal cable to a free SATA port on your mother-
board.
(Note 1) The components received may vary in appearance from the products illustrated.
(Note 2) In the operating system, you can press the Quick Boost button to overclock the CPU and
the button will light red. To return to the defaults, press the button again and the button will
light green.
Ваш отзыв будет первым