- Тип техники
- Бренд
Просмотр инструкции ламинатора Fellowes Saturn 2 A4, страница 4
4
CAPABILITIES
ENGLISH
- Plug the machine into an easily accessible socket.
- To prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power cord or wall socket.
DO ensure the machine is on a stable surface.
DO test laminate scrap sheets and set the machine before final laminations.
DO remove staples and other metal articles prior to laminating.
DO keep the machine away from heat and water sources.
DO turn off the machine after each use.
DO unplug the machine when not in use for an extended period.
DO use pouches designed for use at the appropriate settings.
DO keep away from pets, while in use.
DO ensure self-adhesive pouches are only used with the cold setting.
DO NOT leave the power cord in contact with hot surfaces.
DO NOT leave power cord hanging from cupboards or shelves.
DO NOT use appliance if the power cord is damaged.
DO NOT attempt to open or otherwise repair the machine.
DO NOT exceed the machines quoted performance.
DO NOT allow children to use this machine without adult supervision.
DO NOT laminate sharp or metal objects (eg: staples, paper clips).
DO NOT laminate heat-sensitive documents (eg: tickets, ultrasounds etc) on hot
settings.
DO NOT laminate with self-adhesive pouches on hot settings.
DO NOT laminate an empty pouch.
IMPORTANT SAFETY INSTRUCTIONS - KEEP FOR FUTURE USE
LAMINATOR CONTROLS
A On / off switch
B Standby button & LED
C Pouch selection buttons ( , 75, 100, 125 microns)
D Release lever (
)
E Carry handle
F Pouch / document entry slot
G Entry support shelf
H Pouch / document exit
I Cooling system vents
‘Safe Start’ function
When switched on, the machine has a default ‘Safe Start’ function which is
set to the cold pouch setting. You may select other hot temperature settings if
required. The machine will warm-up and alert the user when it is ready.
‘Release’ function
To remove or re-align a pouch during lamination, activate the release lever
located at the rear of the machine. The pouch can only be removed from the
entry slot when the lever is activated.
• For best results, use Fellowes ® brand pouches:
Enhance 80, Impress 100, Enhance 80 - Cold Pouches.
• For self-adhesive (cold pouches) only use the cold setting.
• This machine does not need a carrier to laminate. It is a carrier-free
mechanism.
• Always put the item to be laminated into the appropriate sized pouch.
• Always test laminate with a similar size and thickness before final process.
• Prepare pouch and item for lamination. Place item within pouch centred
and touching the leading sealed edge. Ensure the pouch is not too large for
the item.
• If required, trim excess material from around the item after lamination and
cooling.
• When working with different pouch thickness’ (temperature settings) it is
recommended to first start with the thinnest pouches.
FEATURES & TIPS
Performance
Format A3 or A4
Entry width A3 = 318mm
A4 = 240mm
Pouch thickness (min) 75 microns (per side)
Pouch thickness (max) 125 microns (per side)
Warm up time (estimate) 5-6 minutes
Cool down time 60-90 minutes
Lamination speed (+/- 5%) approx. 30cm/min (fixed speed)
Number of rollers 2
Ready indication Light & beep
Release lever Yes
Clear Path / Anti-jam engine Yes
Cold lamination Yes
Technical Data
Voltage / Frequency / Current(Amps) A3 = 220-240V AC, 50/60Hz, 2.2A
A4 = 220-240V AC, 50/60Hz, 2.0A
Wattage A3 = 480 Watts
A4 = 430 Watts
Dimensions (HxWxD) A3 = 570 x 155 x 108 mm
A4 = 450 x 143 x 108 mm
Net weight A3 = 2.0 kg
A4 = 1.7 kg
Max document thickness
(laminating capacity) 1 mm
Ваш отзыв будет первым
Вопросы пользователей
Поиск:
по производителю
по типу техники
по модели
Сортировать:
по дате
c ответами
Марина
21 июля 2021, Тюмень
Как правильно пользоваться ламинатором?
0 ответов
Ответить
0