- Тип техники
- Бренд
Просмотр инструкции измерительного прибора Bosch GLM 80, страница 33
English | 33
Bosch Power Tools 2 609 140 807 | (21.1.11)
Troubleshooting – Causes and
Corrective Measures
Cause Corrective Measure
Temperature warning indicator (k) flashing;
measurement not possible
The measuring tool is
outside the operating
temperature range from
–10°C to +50°C (in
the function continuous
measurement up to
+40 °C).
Wait until the meas-
uring tool has
reached the operat-
ing temperature
“ERROR” indication in the display
Addition/Subtraction of
measured values with
different units of meas-
ure
Only add/subtract
measured values
with the same units
of measure
The angle between the
laser beam and the tar-
get is too acute.
Enlargen the angle
between the laser
beam and the target
The target surface re-
flects too intensely (e.g.
a mirror) or insufficient-
ly (e.g. black fabric), or
the ambient light is too
bright.
Work with the laser
target plate 28 (ac-
cessory)
The laser beam outlet
16 or the reception lens
17 are misted up (e.g.
due to a rapid tempera-
ture change).
Wipe the laser beam
outlet 16 and/or the
reception lens 17
dry using a soft
cloth
Calculated value is
greater than
999999 m/m
2
/m
3
.
Divide calculation
into intermediate
steps
Indication “>60°” or “<–60°” on the display
The inclination measur-
ing range for the meas-
uring mode and/or the
reference plane has
been exceeded.
Carry out the meas-
urement within the
specified angle
range.
“CAL” and “ERROR” indication in the display
The calibration of the
grade measurement was
not carried out in the
correct sequence or in
the correct positions.
Repeat the calibra-
tion according to
the instructions on
the display and in
the operating in-
structions.
The surfaces used for
the calibration were not
accurately aligned (hori-
zontal or vertical).
Repeat the calibra-
tion on a horizontal
or vertical surface; if
required, check the
surface first with a
level.
The measuring tool was
moved or tilted while
pressing the button.
Repeat the calibra-
tion and hold the
measuring tool in
place while pressing
the button.
Battery charge-control indicator (g), temper-
ature warning (k) and “ERROR” indication in
the display
Temperature of the
measuring tool not with-
in the allowable charge-
temperature range
Wait until the
charge-tempera-
ture range is
reached.
Battery charge-control indicator (g) and
“ERROR” indication in the display
Battery charging voltage
not correct
Check if the plug-in
connection has
been established
correctly and if the
battery charger is
operating properly.
When the unit sym-
bol is flashing, the
battery is defective
and must be re-
placed by a Bosch
after-sales service.
Battery charge-control indicator (g) and
clock symbol f in the display
Charge duration clearly
too long, as charging
current too low.
Only use the original
Bosch charger.
Cause Corrective Measure
OBJ_BUCH-1347-001.book Page 33 Friday, January 21, 2011 10:30 AM
Ваш отзыв будет первым
Вопросы пользователей
Поиск:
по производителю
по типу техники
по модели
Сортировать:
по дате
c ответами
Владимир
22 декабря 2021, Татарстан
Здравствуйте! Живу в Тольятти. Где купить зарядное устройство на BOSCH GLM 80 профессионал? Какая цена зарядного устройства? Спасибо.
0 ответов
Ответить
0