- Тип техники
- Бренд
Просмотр инструкции измерительного прибора Bosch DLE 40, страница 12
12 | English
2 609 140 582 | (14.7.11) Bosch Power Tools
13 On/Off and memory delete button
14 1/4" thread
15 Latch of battery lid
16 Battery lid
17 Serial number
18 Laser beam outlet
19 Reception lens
20 Tripod*
21 Laser viewing glasses*
22 Laser target plate*
23 Carrying strap*
24 Protective pouch
* The accessories illustrated or described are not included as
standard delivery.
Display Elements
a Battery indicator
b Temperature warning
c Measured value/result
d Unit of measure
e Measurement reference level
f Laser switched on
g Individual measured value (for length measurement:
result)
h Measuring functions
Length measurement
Tracking (continuous measurement)
Area measurement
Volume measurement
i Measured values stored
Technical Data
Assembly
Inserting/Replacing the Battery (see figure A)
Use only alkali-manganese or rechargeable batteries.
Less measurements are possible when using 1.2 V recharge-
able batteries than with 1.5 V batteries.
To open the battery lid 16, press the latch 15 in the direction
of the arrow and remove the battery lid. Insert the batteries
provided. Pay attention to the correct polarity of the batteries
according to the representation in the battery compartment.
When the battery symbol appears in the display for the
first time, then at least 100 measurements are still possible.
The batteries must be replaced when the battery symbol
flashes; taking measurements is no longer possible.
Always replace all batteries at the same time. Only use batter-
ies from one brand and with the identical capacity.
f Remove the batteries from the measuring tool when
not using it for extended periods. When storing for ex-
tended periods, the batteries can corrode and discharge
themselves.
Digital Laser Rangefinder DLE 40
Professional
Article number 3 601 K16 300
Measuring range
0.05–40 m
A)
Measuring accuracy (typically) ± 1.5 mm
B)
Lowest indication unit 1mm
Operating temperature
–10 °C...+50 °C
C)
Storage temperature –20 °C...+70 °C
Relative air humidity, max.
90 %
Laser class
2
Laser type
635 nm, <1 mW
Laser beam diameter (at 25 °C)
approx.
– at 10 m distance
– at 40 m distance
6mm
24 mm
Batteries
Rechargeable batteries
4 x 1.5 V LR03 (AAA)
4x1.2VKR03(AAA)
Battery live, approximately
– Individual measurements
– Continuous measurement
30000
D)
5h
D)
Automatic switch-off after approx.
–Laser
– Measuring tool (without meas-
urement)
20 s
5min
Weight according to
EPTA-Procedure 01/2003
0.18 kg
Dimensions
58x100x32mm
Degree of protection (excluding
battery compartment)
IP 54 (dust and splash
water protected)
A) The working range increases depending on how well the laser light is
reflected from the surface of the target (scattered, not reflective) and
with increased brightness of the laser point to the ambient light intensity
(interior spaces, twilight). In unfavourable conditions (e.g. when meas-
uring outdoors at intense sunlight), it may be necessary to use the target
plate.
B) In unfavourable conditions (e. g. at intense sunlight or an insufficient-
ly reflecting surface), the maximum deviation is
±10 mm per 40 m. In
favourable conditions, a deviation influence of ±0.05 mm/m must be
taken into account.
C) In the continuous measurement function, the maximum operating
temperature is +40 °C.
D) Less measurements are possible when using 1.2 V rechargeable bat-
teries than with 1.5 V batteries.
Please observe the article number on the type plate of your measuring
tool. The trade names of the individual measuring tools may vary.
The measuring tool can be clearly identified with the serial number 17
on the type plate.
Digital Laser Rangefinder DLE 40
Professional
OBJ_DOKU-27402-001.fm Page 12 Thursday, July 14, 2011 10:43 AM
Ваш отзыв будет первым